Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200
High Intensity Discharge Headlight Bulb -- Installation |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. INSTALL DISCHARGE HEADLIGHT BULB |
Install the discharge headlight bulb and lock the set spring as shown in the illustration.
- NOTICE:
- Do not touch the discharge headlight bulb glass.
 |
| 2. INSTALL HEADLIGHT GASKET |
Install a new headlight gasket to the headlight light control ECU sub-assembly LH.
| 3. INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH |
Turn the headlight light control ECU sub-assembly LH socket in the direction indicated by the arrow in the illustration to connect the headlight light control ECU sub-assembly LH socket.
- NOTICE:
- Check that the headlight gasket is installed on the headlight light control ECU subassembly LH.
- Check that the headlight gasket is not damaged or contaminated with foreign matter. If there is any damage, replace the headlight gasket with a new one.
- Do not pull the headlight light control ECU sub-assembly LH with the socket connected.
 |
Turn the headlight light control ECU sub-assembly LH in the direction indicated by the arrow in the illustration to install the headlight unit.
 |
Connect the connector.
| 4. INSTALL BATTERY |
Install the battery.
Install the stay and bolt.
Connect cable to positive battery terminal.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).