Headlight Cleaner Switch Removal

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Wiper Washer. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE INSTRUMENT SIDE PANEL LH

  2. REMOVE FRONT DOOR SCUFF PLATE LH

  3. REMOVE COWL SIDE TRIM BOARD LH

  4. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

  5. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

  6. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  7. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  8. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

  9. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

  10. REMOVE NO. 1 SWITCH HOLE BASE

  11. REMOVE HEADLIGHT CLEANER SWITCH ASSEMBLY

Headlight Cleaner Switch -- Removal


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE INSTRUMENT SIDE PANEL LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Put protective tape around the instrument side panel LH.

    Text in Illustration
    *a
    		Protective Tape

  1. Using a moulding remover A, detach the 6 claws and remove the instrument side panel LH.



2. REMOVE FRONT DOOR SCUFF PLATE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 7 claws and 4 clips, and remove the front door scuff plate LH.



3. REMOVE COWL SIDE TRIM BOARD LH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Headlight Cleaner Switch Removal

  1. Remove the cap nut.

    Text in Illustration
    *a
    		Cap Nut

  1. Detach the 2 clips and remove the cowl side trim board LH.



4. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION


  1. for Type A:



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Headlight Cleaner Switch Removal

    1. Put protective tape around the No. 2 instrument panel finish panel cushion.

      Text in Illustration
      *a
      		Protective Tape

    2. Using a moulding remover B, detach the 4 claws and 3 clips and remove the No. 2 instrument panel finish panel cushion.



  1. for Type B:



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Headlight Cleaner Switch Removal

    1. Put protective tape around the No. 2 instrument panel finish panel cushion.

      Text in Illustration
      *a
      		Protective Tape

    2. Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.



5. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the clip and screw.

  1. Detach the 8 claws.

  1. Disconnect the connectors, detach the 2 clamps and remove the lower instrument panel pad sub-assembly.



6. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Headlight Cleaner Switch Removal

  1. Put protective tape around the No. 1 instrument cluster finish panel garnish.

    Text in Illustration
    *a
    		Protective Tape

  1. Using a moulding remover A, detach the 3 claws and remove the No. 1 instrument cluster finish panel garnish.



7. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Headlight Cleaner Switch Removal

  1. Put protective tape around the No. 2 instrument cluster finish panel garnish.

    Text in Illustration
    *a
    		Protective Tape

  1. Using a moulding remover A, detach the 2 claws and remove the No. 2 instrument cluster finish panel garnish.



8. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Headlight Cleaner Switch Removal

  1. Remove the 2 screws <A>.

    Text in Illustration
    *a
    		Screw <A>

  1. Detach the 3 claws.

  1. Disconnect the connector and remove the No. 1 instrument panel under cover sub-assembly.



9. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL


Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Headlight Cleaner Switch Removal

  1. Using a screwdriver, detach the 2 claws and open the hole cover.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration
    *a
    		Protective Tape


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Headlight Cleaner Switch Removal

  1. Put protective tape around the lower No. 1 instrument panel finish panel.

  1. Remove the 2 bolts <B>.

    Text in Illustration
    *a
    		Protective Tape
    *b
    		Bolt <B>


  1. w/ Driver Side Knee Airbag:



    1. Detach the 16 claws.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Headlight Cleaner Switch Removal



  1. w/o Driver Side Knee Airbag:



    1. Detach the 9 claws.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Headlight Cleaner Switch Removal



  1. for Automatic Air Conditioning System:



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Detach the 2 claws and remove the room temperature sensor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and disconnect the 2 control cables.

  1. Disconnect the connectors and remove the lower No. 1 instrument panel finish panel.



10. REMOVE NO. 1 SWITCH HOLE BASE


Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Headlight Cleaner Switch Removal

  1. Put protective tape around the No. 1 switch hole base.

    Text in Illustration
    *a
    		Protective Tape

  1. Detach the 4 claws.

  1. Disconnect the connectors and remove the No. 1 switch hole base.



11. REMOVE HEADLIGHT CLEANER SWITCH ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the headlight cleaner switch assembly.