Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1GR-FE FUEL
FUEL PUMP (for Double Tank Type) - DISASSEMBLY
- NOTICE:
- Do not disconnect the hoses indicated in the illustration.
| 1. REMOVE FUEL SENDER GAUGE ASSEMBLY |
Disconnect the fuel sender gauge connector.
Press down on the sender gauge claw labeled A. Then slide the sender gauge upward to remove it.
 | Press Down |
 | Slide |
| 2. REMOVE NO. 1 FUEL SUB-TANK |
Disconnect the fuel pump connector.
Disconnect the jet pump (labeled A) from the sub-tank.
Disconnect the jet pump (labeled B) from the sub-tank.
Using a small screwdriver, detach the claw from the sub-tank.
- HINT:
- Tape the screwdriver tip before use.
Using a screwdriver, detach the 3 claws from the claw holes.
- NOTICE:
- Do not damage the fuel sub-tank.
- HINT:
- Tape the screwdriver tip before use.
Using a screwdriver, detach the 3 claws from the claw holes.
- NOTICE:
- Do not damage the fuel sub-tank.
- HINT:
- Tape the screwdriver tip before use.
| 3. REMOVE FUEL PUMP |
Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the fuel filter case.
- HINT:
- Tape the screwdriver tip before use.
Disconnect the fuel pump wire harness connector from the fuel pump to remove it.
Remove the O-ring and spacer from the fuel pump.
| 4. REMOVE FUEL MAIN VALVE ASSEMBLY |
Remove the fuel main valve from the fuel filter case.
Remove the 2 O-rings from the fuel main valve.
| 5. REMOVE NO. 1 FUEL SUCTION SUPPORT |
Detach the 2 claws from the claw holes to remove the fuel suction support.