Front Wiper Motor Removal

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Wiper Washer. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE UPPER RADIATOR SUPPORT SEAL

  4. REMOVE FRONT FENDER MAIN SEAL LH

  5. REMOVE FRONT FENDER MAIN SEAL RH

  6. REMOVE FRONT WIPER ARM LH

  7. REMOVE FRONT WIPER ARM RH

  8. REMOVE HOOD TO COWL TOP SEAL

  9. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

  10. REMOVE WINDSHIELD WIPER LINK ASSEMBLY

  11. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY

Front Wiper Motor -- Removal


HINT:
  1. Use the same procedure for LHD and RHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE UPPER RADIATOR SUPPORT SEAL


  1. Remove the 7 clips and radiator support seal.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Front Wiper Motor Removal



4. REMOVE FRONT FENDER MAIN SEAL LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a clip remover, detach the 3 clips and remove the fender main seal.



5. REMOVE FRONT FENDER MAIN SEAL RH
HINT:
Use the same procedure described for the LH side.


6. REMOVE FRONT WIPER ARM LH

  1. Remove the nut, wiper arm and blade.



7. REMOVE FRONT WIPER ARM RH

  1. Remove the nut, wiper arm and blade.



8. REMOVE HOOD TO COWL TOP SEAL


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a clip remover, detach the 12 clips, 4 clamps and remove the hood to cowl top seal.



9. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the washer hose.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 clips.

  1. Detach the 17 claws and remove the cowl top ventilator louver sub-assembly.



10. REMOVE WINDSHIELD WIPER LINK ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Front Wiper Motor Removal

  1. Disconnect the connector. Then detach the clamp and remove the wire harness from the cowl top panel.

  1. Remove the 3 bolts and slide the link to disconnect the connection as shown in the illustration to remove the wiper link.



11. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Wiper Washer.Wiper And Washer System (W/ Rain Sensor).Front Wiper Motor Removal

  1. Detach the clamp and remove the wiper motor cover.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a screwdriver with the tip wrapped with protective tape, disconnect the rod of the windshield wiper link assembly from the crank arm pivot of the windshield wiper motor assembly as shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a pair of water pump pliers, pull back the boot, taking care not to damage it, and remove the wiper arm from the crank arm pivot as shown in the illustration.

    NOTICE:
    Do not damage the pivot.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a T30 "TORX" socket, remove the 2 screws and wiper motor.