Wiper And Washer System (W/O Rain Sensor) How To Proceed With Troubleshooting

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Wiper Washer. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. VEHICLE BROUGHT TO WORKSHOP

  2. CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK

  3. INSPECT BATTERY VOLTAGE

  4. PROBLEM SYMPTOMS TABLE

  5. OVERALL ANALYSIS AND TROUBLESHOOTING*

  6. ADJUST, REPAIR OR REPLACE

  7. CONFIRMATION TEST

Wiper And Washer System (W/O Rain Sensor) -- How To Proceed With Troubleshooting


HINT:
  1. Use the following procedure to troubleshoot the wiper and washer system.
  2. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK

      NEXT


      3.INSPECT BATTERY VOLTAGE

      1. Measure the battery voltage with the ignition switch off.

        Standard voltage:
        11 to 14 V
        If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

      NEXT


      4.PROBLEM SYMPTOMS TABLE

      1. Refer to the Problem Symptoms Table (Click here).

        2. Result
        Result
        		Proceed to
        Fault is not listed in Problem Symptoms Table
        		A
        Fault is listed in Problem Symptoms Table
        		B


      		B.
      ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE
      A


      5.OVERALL ANALYSIS AND TROUBLESHOOTING*

      1. Data List / Active Test (Click here).

      2. Terminals of ECU (Click here).

      3. Inspection.

      4. On-vehicle inspection.


      NEXT


      6.ADJUST, REPAIR OR REPLACE

        NEXT


        7.CONFIRMATION TEST

          NEXT

          END