Fuel Lid Lock Control Cable Assembly (For Lhd) Removal

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Door Hatch. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE FRONT SEAT ASSEMBLY LH

  4. REMOVE FRONT SEAT ASSEMBLY RH

  5. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  6. REMOVE REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 60 Side)

  7. REMOVE REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 40 Side)

  8. REMOVE REAR NO. 1 SEAT ASSEMBLY (for Bench Seat Type)

  9. REMOVE INSTRUMENT SIDE PANEL LH

  10. REMOVE INSTRUMENT SIDE PANEL RH (w/o Airbag Cut Off Switch)

  11. REMOVE INSTRUMENT SIDE PANEL RH (w/ Airbag Cut Off Switch)

  12. REMOVE FRONT DOOR SCUFF PLATE LH

  13. REMOVE FRONT DOOR SCUFF PLATE RH

  14. REMOVE COWL SIDE TRIM BOARD LH

  15. REMOVE COWL SIDE TRIM BOARD RH

  16. REMOVE REAR STEP COVER

  17. REMOVE REAR DOOR SCUFF PLATE LH

  18. REMOVE REAR DOOR SCUFF PLATE RH

  19. REMOVE NO. 2 AIR DUCT PLUG

  20. REMOVE AIR HEATER GUIDE LH

  21. REMOVE AIR DUCT PLUG

  22. REMOVE AIR DUCT GUIDE

  23. REMOVE REAR NO. 1 SEAT PROTECTOR

  24. REMOVE REAR NO. 2 SEAT PROTECTOR

  25. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY

  26. REMOVE FRONT FLOOR CARPET ASSEMBLY

  27. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

  28. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

  29. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  30. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

  31. REMOVE FUEL FILLER OPENING LID LOCK RETAINER

  32. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

  33. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

Fuel Lid Lock Control Cable Assembly (For Lhd) -- Removal



1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE FRONT SEAT ASSEMBLY LH

  1. for Manual Seat:
    (Click here)

  1. for Power Seat:
    (Click here)



4. REMOVE FRONT SEAT ASSEMBLY RH

  1. for Manual Seat:
    (Click here)

  1. for Power Seat:
    (Click here)

  1. for Bench Seat Type:
    (Click here)



5. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  1. Remove the tonneau cover.



6. REMOVE REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 60 Side)
(Click here)


7. REMOVE REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 40 Side)
(Click here)


8. REMOVE REAR NO. 1 SEAT ASSEMBLY (for Bench Seat Type)
(Click here)


9. REMOVE INSTRUMENT SIDE PANEL LH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Hatch.Tail Gate Closer System.Fuel Lid Lock Control Cable Assembly (For Lhd) Removal

  1. Place protective tape as shown in the illustration.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 6 claws and remove the instrument side panel.



10. REMOVE INSTRUMENT SIDE PANEL RH (w/o Airbag Cut Off Switch)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Hatch.Tail Gate Closer System.Fuel Lid Lock Control Cable Assembly (For Lhd) Removal

  1. Place protective tape as shown in the illustration.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 6 claws and remove the instrument side panel.



11. REMOVE INSTRUMENT SIDE PANEL RH (w/ Airbag Cut Off Switch)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Hatch.Tail Gate Closer System.Fuel Lid Lock Control Cable Assembly (For Lhd) Removal

  1. Place protective tape as shown in the illustration.

    Text in Illustration
    *1
    		Protective Tape

  1. Using a moulding remover, detach the 6 claws.

  1. Disconnect the connector and remove the instrument side panel.



12. REMOVE FRONT DOOR SCUFF PLATE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 7 claws and 4 clips, and remove the scuff plate.



13. REMOVE FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


14. REMOVE COWL SIDE TRIM BOARD LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the cap nut.

  1. Detach the 2 clips and remove the cowl side trim board.



15. REMOVE COWL SIDE TRIM BOARD RH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the cap nut.

  1. Detach the 2 clips and remove the cowl side trim board.



16. REMOVE REAR STEP COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
Use the same procedure to remove the step cover on the other side.

  1. Detach the 2 claws and remove the step cover.



17. REMOVE REAR DOOR SCUFF PLATE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the screw.

  1. Detach the 3 claws and 4 clips, and remove the scuff plate.



18. REMOVE REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


19. REMOVE NO. 2 AIR DUCT PLUG


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws and remove the 2 plugs.

    HINT:
    Use the same procedures for both sides.


20. REMOVE AIR HEATER GUIDE LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 screws and guide.

    HINT:
    Use the same procedures for both sides.


21. REMOVE AIR DUCT PLUG


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the plug.

    HINT:
    Use the same procedures for both sides.


22. REMOVE AIR DUCT GUIDE


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the screw.

  1. Detach the claw and remove the guide.

    HINT:
    Use the same procedures for both sides.


23. REMOVE REAR NO. 1 SEAT PROTECTOR


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the clip and 4 claws, and remove the protector.

    HINT:
    Use the same procedures to remove the protector on the other side.


24. REMOVE REAR NO. 2 SEAT PROTECTOR


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the clip and 4 claws, and remove the protector.

    HINT:
    Use the same procedures to remove the protector on the other side.


25. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY

  1. w/o Console Box Lid:
    (Click here)

  1. w/ Cool Box:
    (Click here)

  1. w/o Cool Box:
    (Click here)



26. REMOVE FRONT FLOOR CARPET ASSEMBLY


  1. Detach the 2 clips and 8 claws.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Hatch.Tail Gate Closer System.Fuel Lid Lock Control Cable Assembly (For Lhd) Removal



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the carpet from the floor, open the back door and tail gate, and remove the carpet from the rear of the vehicle.



27. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 6 clips and remove the support plate.



28. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
Use the same procedure to remove the tonneau cover holder cap on the other side.

  1. Detach the 2 claws and remove the tonneau cover holder cap.



29. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Hatch.Tail Gate Closer System.Fuel Lid Lock Control Cable Assembly (For Lhd) Removal
HINT:
Use the same procedure to remove the rear seat cover cap on the other side.

  1. Using a screwdriver, detach the 3 claws and remove the rear seat cover cap.

    HINT:
    Tape the screwdriver tip before use.


30. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
When removing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 3 claws and remove the cover.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt and rear No. 1 seat belt anchor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Detach the 3 claws and remove the cover.



      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Remove the bolt and rear No. 2 seat belt anchor.



  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Remove the clip and bolt.

    2. Detach the 16 clips and 2 claws.

    3. w/o Rear Air Conditioning System:
      Disconnect the rear seat lock control lever cable and then remove the quarter trim panel.



    4. w/ Rear Air Conditioning System:
      Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the quarter trim panel.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Hatch.Tail Gate Closer System.Fuel Lid Lock Control Cable Assembly (For Lhd) Removal



  1. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:

    1. Remove the clip.



    2. Detach the 16 clips and 2 claws, and remove the quarter trim panel.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Hatch.Tail Gate Closer System.Fuel Lid Lock Control Cable Assembly (For Lhd) Removal



  1. w/ Tonneau Cover:

    1. Remove the screw and clip.



    2. Detach the 16 clips and 2 claws, and remove the quarter trim panel.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Hatch.Tail Gate Closer System.Fuel Lid Lock Control Cable Assembly (For Lhd) Removal



31. REMOVE FUEL FILLER OPENING LID LOCK RETAINER


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Turn the cable counterclockwise and remove the cable from the retainer.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Turn the lock retainer counterclockwise and remove the lock retainer.



32. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws.

  1. Disconnect the fuel lid lock control cable and remove the fuel lid lock open lever.



33. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


  1. Using a screwdriver, disconnect the clamps shown in the illustration.

    HINT:
    Tape the screwdriver tip before use.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Hatch.Tail Gate Closer System.Fuel Lid Lock Control Cable Assembly (For Lhd) Removal

  1. Remove the lock control cable.