Sliding Roof System Terminals Of Ecu

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Sliding Roof Convertible. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. CHECK SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY (SLIDING ROOF ECU)

Sliding Roof System -- Terminals Of Ecu



CHECK SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY (SLIDING ROOF ECU)

Land Cruiser. Urj200, 202 Grj200 Vdj200.Sliding Roof Convertible.Sliding Roof System.Sliding Roof System Terminals Of Ecu

  1. Disconnect the R15 siding roof drive gear sub-assembly (sliding roof ECU) connector.

  2. Measure the resistance and voltage according to the value(s) in the table below.

    Terminal No. (Symbols)
    		Wiring Color
    		Terminal Description
    		Condition
    		Specified Condition
    R15-8 (B) - R15-12 (E)
    		LA-L - W-B
    		+B power supply
    		Always
    		11 to 14 V
    R15-1 (IG) - R15-12 (E)
    		B - W-B
    		Power supply
    		Engine switch off
    		Below 1 V
    Engine switch on (IG)
    		11 to 14 V
    R15-7 (OPN) - R15-12 (E)
    		P - W-B
    		Sliding roof motor open
    		OPEN switch off
    		10 kΩ or higher
    OPEN switch on
    		Below 1 Ω
    R15-5 (CLS) - R15-12 (E)
    		G - W-B
    		Sliding roof motor close
    		CLOSE switch off
    		10 kΩ or higher
    CLOSE switch on
    		Below 1 Ω
    R15-4 (UP) - R15-12 (E)
    		R - W-B
    		Sliding roof motor up
    		UP switch off
    		10 kΩ or higher
    UP switch on
    		Below 1 Ω
    R15-6 (DWN) - R15-12 (E)
    		GR - W-B
    		Sliding roof motor down
    		DOWN switch off
    		10 kΩ or higher
    DOWN switch on
    		Below 1 Ω
    R15-12 (E) - Body ground
    		W-B - Body ground
    		Ground
    		Always
    		Below 1 Ω