Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Window Glass. Land Cruiser. Urj200, 202 Grj200 Vdj200
Rear Power Window Switch -- Inspection |
| 1. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Models with Jam Protection Function on 4 Windows) |
 |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 6 (UP) - 1 (GND) Manual up operation Below 1 Ω 7 (DOWN) - 1 (GND) Manual down operation Below 1 Ω 8 (AUTO) - 1 (GND) Auto up/down operation Below 1 Ω
- If the result is not as specified, replace the rear power window regulator switch assembly.
Check that the LED illuminates.
Apply battery voltage to the regulator switch and check that the LED illuminates.
- OK:
Measurement Condition Specified Condition Battery positive (+) → 4 (LED)
Battery negative (-) → 1 (GND)LED illuminates
- If the result is not as specified, replace the rear power window regulator switch assembly.
Text in Illustration *1 LED *a Component without harness connected
(Rear Power Window Regulator Switch Assembly)
| 2. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Models with Jam Protection Function on Driver Door Window Only) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 4 (U) - 3 (B)
2 (SD) - 1 (D)UP Below 1 Ω 5 (SU) - 4 (U)
2 (SD) - 1 (D)OFF Below 1 Ω 5 (SU) - 4 (U)
3 (B) - 1 (D)DOWN Below 1 Ω
- If the result is not as specified, replace the rear power window regulator switch assembly.
Text in Illustration *a Component without harness connected
(Rear Power Window Regulator Switch Assembly)
 |