Power Window Control System (For Models With Jam Protection Function On 4 Windows) Key-Off Operation Function Operates Even If Operating Conditions Are Not Satisfied

DESCRIPTION

INSPECTION PROCEDURE

CHECK LIN COMMUNICATION SYSTEM

CHECK POWER WINDOW OPERATION FUNCTION AFTER IGNITION SWITCH OFF

READ VALUE USING INTELLIGENT TESTER (DOOR COURTESY SWITCH)

CHECK FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY

DESCRIPTION

1. When the front doors are closed, each power window regulator motor can control its power window operation for approximately 45 seconds after the ignition switch is turned from ON to off by receiving operation permission signals from the main body ECU.
   

1. However, when approximately 45 seconds have elapsed, or the driver side door or front passenger side door is opened within approximately 45 seconds of the ignition switch being turned off, the power window regulator motor stops operating.
   

1. During the auto function operation, when 45 seconds have passed and key-off operation is prohibited, the window operation stops immediately.
   

1. The front passenger side power window and the rear power windows cannot be operated when the window lock switch is on.
   

INSPECTION PROCEDURE

1. Check for LIN communication system DTCs related to the power window control system (Click here).
   

   OK:

   LIN communication system DTCs are not output.
   

1. Check the power window operation function after the ignition switch is turned off (Click here).
   

   Result

   Result	Proceed to
   Driver side door or front passenger side door is opened within 45 seconds but power windows can still operate	A
   45 seconds pass and power windows can still operate	B

1. Use the Data List to check if the main body ECU is functioning properly (Click here).
   
   

   Main Body

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   D Door Courtesy SW	Driver side door courtesy switch signal / ON or OFF	ON: Driver door open OFF: Driver door closed	-
   P Door Courtesy SW	Front passenger side door courtesy switch signal / ON or OFF	ON: Front passenger door open OFF: Front passenger door closed	-

   OK:

   The display changes according to above chart.
   

1. Open the driver side door and check that the map light illuminates (Click here).
   

   OK:

   Map light illuminates.
   

2. Open the front passenger side door and check that the map light illuminates (Click here).
   

   OK:

   Map light illuminates.