Power Window Control System (For Models With Jam Protection Function On 4 Windows) Operation Check

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Window Glass. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. CHECK WINDOW LOCK SWITCH

  1. CHECK MANUAL UP/DOWN FUNCTION

  1. CHECK AUTO UP/DOWN FUNCTION

  1. CHECK REMOTE MANUAL UP/DOWN FUNCTION

  1. CHECK REMOTE AUTO UP/DOWN FUNCTION

  1. CHECK POWER WINDOW OPERATION FUNCTION AFTER IGNITION SWITCH OFF

  1. CHECK TRANSMITTER-LINKED FUNCTION

  1. CHECK KEY-LINKED FUNCTION USING DRIVER SIDE DOOR KEY CYLINDER

  1. CHECK AUTO UP FUNCTION USING ENTRY LOCK SWITCH (w/ Entry and Start System)

  1. CHECK JAM PROTECTION FUNCTION

  1. CHECK POWER WINDOW REGULATOR SWITCH LED ILLUMINATION

Power Window Control System (For Models With Jam Protection Function On 4 Windows) -- Operation Check



CHECK WINDOW LOCK SWITCH
Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Press the window lock switch of the multiplex network master switch assembly.

    HINT:
    The illumination (LED) built into the switch knob of each seat does not turn off.

  2. Check that the power window for each seat except the driver seat can no longer be operated.

  3. Check that the power window for each seat cannot be operated from the driver seat.

  4. Press the window lock switch of the multiplex network master switch assembly again.

  5. Check that the power window for each seat except the driver seat can be operated.

  6. Check that the power window for each seat can be operated from the driver seat.


CHECK MANUAL UP/DOWN FUNCTION

  1. Check that the driver side power window operates as follows:

    OK
    Condition
    		Multiplex Network Master Switch
    		Switch Operation
    		Power Window
    Ignition switch ON
    		Driver side
    		Pulled halfway up
    		Up (Closes)
    Pushed halfway down
    		Down (Opens)

  2. Check that the front passenger side and rear power windows operate as follows:

    OK
    Condition
    		Power Window Regulator Switch
    		Switch Operation
    		Power Window
    1. Ignition switch ON
    2. Window lock switch off
    		Front passenger side
    		Pulled halfway up
    		Up (Closes)
    Pushed halfway down
    		Down (Opens)
    Rear LH side
    		Pulled halfway up
    		Up (Closes)
    Pushed halfway down
    		Down (Opens)
    Rear RH side
    		Pulled halfway up
    		Up (Closes)
    Pushed halfway down
    		Down (Opens)

CHECK AUTO UP/DOWN FUNCTION

  1. Check that the driver side power window operates as follows:

    OK
    Condition
    		Multiplex Network Master Switch
    		Switch Operation
    		Power Window
    Ignition switch ON
    		Driver side
    		Pulled up (One touch operation)
    		Auto up (Closes)
    Pushed down (One touch operation)
    		Auto down (Opens)

  2. Check that the front passenger side and rear power windows operate as follows:

    OK
    Condition
    		Power Window Regulator Switch
    		Switch Operation
    		Power Window
    1. Ignition switch ON
    2. Window lock switch off
    		Front passenger side
    		Pulled up (One touch operation)
    		Auto up (Closes)
    Pushed down (One touch operation)
    		Auto down (Opens)
    Rear LH side
    		Pulled up (One touch operation)
    		Auto up (Closes)
    Pushed down (One touch operation)
    		Auto down (Opens)
    Rear RH side
    		Pulled up (One touch operation)
    		Auto up (Closes)
    Pushed down (One touch operation)
    		Auto down (Opens)

CHECK REMOTE MANUAL UP/DOWN FUNCTION

  1. Check that the front passenger side and rear power windows operate as follows:

    OK
    Condition
    		Multiplex Network Master Switch
    		Switch Operation
    		Power Window
    1. Ignition switch ON
    2. Window lock switch off
    		Front passenger side
    		Pulled halfway up
    		Up (Closes)
    Pushed halfway down
    		Down (Opens)
    Rear LH side
    		Pulled halfway up
    		Up (Closes)
    Pushed halfway down
    		Down (Opens)
    Rear RH side
    		Pulled halfway up
    		Up (Closes)
    Pushed halfway down
    		Down (Opens)

CHECK REMOTE AUTO UP/DOWN FUNCTION

  1. Check that the front passenger side and rear power windows operate as follows:

    OK
    Condition
    		Multiplex Network Master Switch
    		Switch Operation
    		Power Window
    1. Ignition switch ON
    2. Window lock switch off
    		Front passenger side
    		Pulled up (One touch operation)
    		Auto up (Closes)
    Pushed down (One touch operation)
    		Auto down (Opens)
    Rear LH side
    		Pulled up (One touch operation)
    		Auto up (Closes)
    Pushed down (One touch operation)
    		Auto down (Opens)
    Rear RH side
    		Pulled up (One touch operation)
    		Auto up (Closes)
    Pushed down (One touch operation)
    		Auto down (Opens)

CHECK POWER WINDOW OPERATION FUNCTION AFTER IGNITION SWITCH OFF

  1. Check that all the power windows can be operated with the multiplex network master switch after the ignition switch is turned off.

  2. Check that the key-off operation function does not operate after a front side door is opened.

  3. Check that all the power windows cannot be operated after more than approximately 45 seconds have elapsed since the ignition switch was turned off.


CHECK TRANSMITTER-LINKED FUNCTION

  1. Check that all power windows operate as follows when operating the transmitter.

    OK
    Condition
    		Transmitter Operation
    		Power Window
    No key is inside vehicle, and all doors are closed and locked.
    		Unlock switch pressed for more than 3.0 seconds.
    		Down (Opens)
    No key is inside vehicle, and all doors are closed and locked.
    		Unlock switch released.
    		Stop

CHECK KEY-LINKED FUNCTION USING DRIVER SIDE DOOR KEY CYLINDER

  1. Check that all power windows operate as follows.

    OK
    Condition
    		Door Key Cylinder Operation
    		Power Window
    No key is inside vehicle, and all doors are closed.
    		Turned to lock for more than 2.3 seconds.
    		Up (Closes)
    No key is inside vehicle, and all doors are closed.
    		Returned to neutral position.
    		Stop
    No key is inside vehicle, and all doors are closed.
    		Turned to unlock for more than 2.3 seconds.
    		Down (Opens)
    No key is inside vehicle, and all doors are closed.
    		Returned to neutral position.
    		Stop

CHECK AUTO UP FUNCTION USING ENTRY LOCK SWITCH (w/ Entry and Start System)

  1. Check that all power windows operate as follows when the entry lock switch is pressed and held.

    OK
    Condition
    		Switch Operation
    		Power Window
    No key is inside vehicle, and all doors are closed.
    		Entry lock switch pressed for more than 3.0 seconds.
    		Up (Closes)
    No key is inside vehicle, and all doors are closed.
    		Entry lock switch released.
    		Stop

CHECK JAM PROTECTION FUNCTION


  1. Check the basic function.

    CAUTION:
    1. The jam protection function is operative during both the auto up and manual up operation.
    2. Do not put your fingers between the door frame and door glass to check functions. Also, prevent any part of your body from being caught during inspection.
    HINT:
    The jam protection function is operative during both the auto up and manual up operation while the engine is running or the ignition switch is ON, and also 45 seconds after the ignition switch is off.

    1. Fully open the window.



      2. Land Cruiser. Urj200, 202 Grj200 Vdj200.Window Glass.Power Window Control System (For Models With Jam Protection Function On 4 Windows).Power Window Control System (For Models With Jam Protection Function On 4 Windows) Operation Check

    2. Hold a thick book wrapped with cloth in the position shown in the illustration.

    3. Operate the auto up or manual up function to check that the power window goes down when the window contacts the book, and stops when the opening reaches approximately 200 mm (7.87 in.).

      HINT:
      The power window moves down approximately 125 mm (4.93 in.). However, when the opening does not reach 200 mm (7.87 in.), the power window continues to go down until the opening reaches 200 mm (7.87 in.) or until approximately 5 seconds have elapsed.

    4. While the power window is moving down, check that the door glass cannot be moved up even when the power window regulator switch is used.


CHECK POWER WINDOW REGULATOR SWITCH LED ILLUMINATION


  1. When the ignition switch is turned from off to ON with the connectors connected, check that the illumination (LED) on the switch portion of the power window regulator switch assembly turns on.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Window Glass.Power Window Control System (For Models With Jam Protection Function On 4 Windows).Power Window Control System (For Models With Jam Protection Function On 4 Windows) Operation Check