Front Console Box (W/O Console Box Lid) -- Removal |
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1. REMOVE FRONT SEAT ASSEMBLY RH |
| 2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
 |
Put protective tape around the No. 2 instrument panel finish panel cushion.
Text in Illustration *1 Protective Tape
Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.
| 3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH |
 |
Remove the clip and screw.
Detach the 8 claws.
Disconnect the connectors, detach the 2 clamps and remove the lower instrument panel pad sub-assembly.
| 4. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION |
 |
Put protective tape around the No. 1 instrument panel finish panel cushion.
Text in Illustration *1 Protective Tape
Using a moulding remover, detach the 7 claws and remove the No. 1 instrument panel finish panel cushion.
| 5. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH |
 |
Remove the clip and screw.
Detach the 7 claws and remove the lower instrument panel pad sub-assembly.
| 6. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
 |
Detach the 7 claws.
Disconnect the connectors and remove the lower center instrument cluster finish panel sub-assembly.
| 7. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH |
Put protective tape around the upper No. 2 console panel garnish.
Using a screwdriver, detach the 8 claws and remove the upper No. 2 console panel garnish.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *A for Separate Seat Type *B for Bench Seat Type *1 Protective Tape - -
| 8. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH |
 |
Put protective tape around the upper No. 1 console panel garnish.
Using a screwdriver, detach the 8 claws and remove the upper No. 1 console panel garnish.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1 Protective Tape
| 9. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
Put protective tape around the rear upper console panel sub-assembly.
Using a moulding remover, detach the 12 claws and remove the rear upper console panel sub-assembly.
Text in Illustration *1 Protective Tape - -
| 10. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
 |
Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.
| 11. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
 |
Put protective tape around the upper console panel sub-assembly.
Using a moulding remover, detach the 8 claws and remove the upper console panel sub-assembly.
| 12. REMOVE LOWER CONSOLE BOX |
 |
Remove the 2 screws and 4 bolts.
Detach the 2 claws and remove the lower console box.