Rear Power Outlet Socket Installation

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Power Outlets (Int). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL POWER OUTLET SOCKET COVER NO.2

  2. INSTALL POWER OUTLET SOCKET ASSEMBLY

  3. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

  4. INSTALL REAR SEAT COVER CAP (except Face to Face Seat Type)

  5. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

  6. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

  7. INSTALL REAR DOOR SCUFF PLATE LH

  8. INSTALL REAR STEP COVER

  9. INSTALL REAR NO. 2 SEAT ASSEMBLY (except Face to Face Seat Type)

  10. INSTALL REAR NO. 2 SEAT HINGE COVER LH (except Face to Face Seat Type)

  11. INSTALL REAR SEAT CUSHION HINGE COVER LH (except Face to Face Seat Type)

  12. INSTALL REAR NO. 2 SEAT HEADREST ASSEMBLY LH (w/ Rear Center Seat Headrest)

  13. INSTALL REAR NO. 2 SEAT ASSEMBLY (for Face to Face Seat Type)

  14. INSTALL REAR SIDE SEAT LEG PROTECTOR LH (for Face to Face Seat Type)

  15. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

Rear Power Outlet Socket -- Installation



1. INSTALL POWER OUTLET SOCKET COVER NO.2

  1. Engage the 2 claws and install the power outlet socket cover.



2. INSTALL POWER OUTLET SOCKET ASSEMBLY

  1. Engage the claw and install the power outlet socket assembly.

  1. Engage the 4 claws and install the power outlet socket bezel.



3. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
When installing the front quarter trim panel assembly LH, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. w/o Rear Air Conditioning System:
      Connect the rear seat lock control lever cable.

    2. w/ Rear Air Conditioning System:
      Connect the thermistor connector and rear seat lock control lever cable.

    3. Attach the 18 clips and 2 claws to install the front quarter trim panel assembly LH.



    4. Install the clip and bolt.

      Torque:
      12 N*m{122 kgf*cm, 9 ft.*lbf}


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Power Outlets (Int).Wireless Charging System.Rear Power Outlet Socket Installation



  1. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:

    1. Attach the 18 clips and 2 claws to install the front quarter trim panel assembly LH.



    2. Install the clip.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Power Outlets (Int).Wireless Charging System.Rear Power Outlet Socket Installation



  1. w/ Tonneau Cover:

    1. Attach the 18 clips and 2 claws to install the front quarter trim panel assembly LH.



    2. Install the screw and clip.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Power Outlets (Int).Wireless Charging System.Rear Power Outlet Socket Installation



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Power Outlets (Int).Wireless Charging System.Rear Power Outlet Socket Installation

  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:
    Install the rear No. 2 seat belt anchor with the bolt.

    Torque:
    42 N*m{428 kgf*cm, 31 ft.*lbf}
    NOTICE:
    Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
    Text in Illustration
    *a
    		Protruding Part


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the rear No. 1 seat belt anchor with the bolt.

    Torque:
    42 N*m{428 kgf*cm, 31 ft.*lbf}


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 claws to install the outer lap belt anchor cover.



4. INSTALL REAR SEAT COVER CAP (except Face to Face Seat Type)
HINT:
Use the same procedure to install the rear seat cover cap on the other side.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 claws to install the rear seat cover cap.



5. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)
HINT:
Use the same procedure for No. 1 tonneau cover holder caps.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the No. 1 tonneau cover holder cap.



6. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 6 clips to install the rear floor mat support plate.



7. INSTALL REAR DOOR SCUFF PLATE LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 3 claws and 4 clips to install the rear door scuff plate LH.

  1. Install the screw.



8. INSTALL REAR STEP COVER
HINT:
Use the same procedure for both rear step covers.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the rear step cover.



9. INSTALL REAR NO. 2 SEAT ASSEMBLY (except Face to Face Seat Type)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Power Outlets (Int).Wireless Charging System.Rear Power Outlet Socket Installation

  1. Temporarily install the seat assembly with the 4 bolts.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Tighten the bolts in the order shown in the illustration.

    Torque:
    37 N*m{377 kgf*cm, 27 ft.*lbf}


10. INSTALL REAR NO. 2 SEAT HINGE COVER LH (except Face to Face Seat Type)

  1. Attach the clip and 2 claws to install the cover.



11. INSTALL REAR SEAT CUSHION HINGE COVER LH (except Face to Face Seat Type)

  1. Attach the 3 claws to install the cover.

  1. Return the seat to the upright position.



12. INSTALL REAR NO. 2 SEAT HEADREST ASSEMBLY LH (w/ Rear Center Seat Headrest)


13. INSTALL REAR NO. 2 SEAT ASSEMBLY (for Face to Face Seat Type)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Power Outlets (Int).Wireless Charging System.Rear Power Outlet Socket Installation

  1. Temporarily install the rear No. 2 seat with the 4 bolts.

  1. Tighten the bolts in the order shown in the illustration.

    Torque:
    37 N*m{377 kgf*cm, 27 ft.*lbf}


14. INSTALL REAR SIDE SEAT LEG PROTECTOR LH (for Face to Face Seat Type)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the protector.



15. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

  1. Install the tonneau cover assembly.