INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
INSTALL NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL (w/o Audio)
Air Conditioning Panel (W/O Navigation System) -- Installation |
- HINT:
- Use the same procedures for the LHD vehicle and RHD vehicle.
- The procedures listed below are for the LHD vehicle.
| 1. INSTALL AIR CONDITIONING CONTROL ASSEMBLY |
Connect the connectors.
Insert the air conditioning control assembly and attach the 5 claws on its backside.
- NOTICE:
- When inserting the air conditioning control assembly, do not press the knobs on it.
| 2. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
for Type A:
Attach the 6 claws to install the lower center instrument cluster finish panel sub-assembly.
for Type B:
Connect the connectors.
Attach the 7 claws to install the lower center instrument cluster finish panel sub-assembly.
| 3. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH |
for Type A:
Attach the 11 claws and guide to install the lower instrument panel pad sub-assembly RH.
Install the screw and clip.
for Type B:
Attach the 7 claws to install the lower instrument panel pad sub-assembly RH.
Install the screw and clip.
| 4. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION |
for Type A:
Attach the 4 claws and 3 clips to install the No. 1 instrument panel finish panel cushion.
for Type B:
Attach the 7 claws to install the panel No. 1 instrument panel finish panel cushion.
| 5. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH |
for Type A:
Connect the connectors and clamps.
Attach the 11 claws and guide to install the lower instrument panel pad sub-assembly LH.
Install the screw and clip.
for Type B:
Connect the connectors and clamps.
Attach the 8 claws and 2 guides to install the lower instrument panel pad sub-assembly LH.
Install the screw and clip.
| 6. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION |
for Type A:
Attach the 4 claws and 3 clips to install the No. 2 instrument panel finish panel cushion.
for Type B:
Attach the 7 claws to install the No. 2 instrument panel finish panel cushion.
| 7. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio) |
Connect the connectors.
Insert the radio and display receiver assembly with bracket to attach the 6 claws and 2 clips on its backside.
- NOTICE:
- When inserting the radio and display receiver assembly with bracket, do not press the knobs on it.
 |
Install the radio and display receiver assembly with bracket with the 2 screws and 2 bolts.
- Torque:
- Bolt:
- 8.5 N*m{87 kgf*cm, 75 in.*lbf}
 |
| 8. INSTALL NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL (w/o Audio) |
 |
for Type A:
Connect the connector.
Attach the 8 claws and 3 clips to install the No. 1 center instrument cluster finish panel.
for Type B:
Connect the connector.
Attach the 10 claws to install the No. 1 center instrument cluster finish panel.
| 9. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY |
for Type A:
Attach the guide and 7 claws to install the No. 4 instrument panel register assembly.
for Type B:
Attach the 6 claws to install the No. 4 instrument panel register assembly.
| 10. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY |
for Type A:
Attach the guide and 7 claws to install the No. 3 instrument panel register assembly.
for Type B:
Attach the 6 claws to install the No. 3 instrument panel register assembly.
| 11. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY |
 |
Attach the 8 clips to install the No. 1 speaker opening cover assembly.
| 12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).