Air Conditioning Panel (W/O Navigation System) Removal

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200

Heating Air Conditioning. Land Cruiser. Urj200, 202 Grj200 Vdj200

PRECAUTION
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY
REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
REMOVE NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL (w/o Audio)
REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio)
REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION
REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION
REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH
REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
REMOVE AIR CONDITIONING CONTROL ASSEMBLY

Air Conditioning Panel (W/O Navigation System) -- Removal

HINT:

Use the same procedures for the LHD vehicle and RHD vehicle.
The procedures listed below are for the LHD vehicle.

1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

3. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

Land Cruiser. Urj200, 202 Grj200 Vdj200.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).Air Conditioning Panel (W/O Navigation System) Removal

Put protective tape around the No. 1 speaker opening cover assembly.
Text in Illustration
*a
Protective Tape

Using a moulding remover A, detach the 8 clips and remove the No. 1 speaker opening cover assembly.

4. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

for Type A:
1. Put protective tape around the No. 3 instrument panel register assembly.
  Text in Illustration
  *a
  Protective Tape
2. Using moulding remover B, raise the No. 3 instrument panel register assembly.
3. Pull the No. 3 instrument panel register assembly by hand to detach the 7 claws and guide and remove the No. 3 instrument panel register assembly.

for Type B:
1. Put protective tape around the No. 3 instrument panel register assembly.
  Text in Illustration
  *a
  Protective Tape
2. Using moulding remover B, raise the No. 3 instrument panel register assembly.
3. Pull the No. 3 instrument panel register assembly by hand to detach the 6 claws and remove the No. 3 instrument panel register assembly.

5. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

for Type A:
1. Put protective tape around the No. 3 instrument panel register assembly.
  Text in Illustration
  *a
  Protective Tape
2. Using moulding remover B, raise the No. 3 instrument panel register assembly.
3. Pull the No. 3 instrument panel register assembly by hand to detach the 7 claws and guide and remove the No. 3 instrument panel register assembly.

for Type B:
1. Put protective tape around the No. 3 instrument panel register assembly.
  Text in Illustration
  *a
  Protective Tape
2. Using moulding remover B, raise the No. 3 instrument panel register assembly.
3. Pull the No. 3 instrument panel register assembly by hand to detach the 6 claws and remove the No. 3 instrument panel register assembly.

6. REMOVE NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL (w/o Audio)

for Type A:
1. Detach the 8 claws and 3 clips.
2. Disconnect the connectors and remove the No. 1 center instrument cluster finish panel.

for Type B:
1. Detach the 10 claws.
2. Disconnect the connectors and remove the No. 1 center instrument cluster finish panel.

7. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio)

Land Cruiser. Urj200, 202 Grj200 Vdj200

Remove the 2 screws and 2 bolts.

Land Cruiser. Urj200, 202 Grj200 Vdj200

Pull the radio and display receiver assembly with bracket to detach the 6 claws and 2 clips on the backside of the radio and display receiver assembly with bracket.

Disconnect the connectors and remove the radio and display receiver assembly with bracket.

8. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

for Type A:
1. Put protective tape around the No. 2 instrument panel finish panel cushion.
  Text in Illustration
  *a
  Protective Tape
2. Using a moulding remover B, detach the 4 claws and 3 clips and remove the No. 2 instrument panel finish panel cushion.

for Type B:
1. Put protective tape around the No. 2 instrument panel finish panel cushion.
  Text in Illustration
  *a
  Protective Tape
2. Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.

9. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

for Type A:
1. Put protective tape around the lower instrument panel pad sub-assembly LH.
  Text in Illustration
  *a
  Protective Tape
2. Remove the clip and screw.
3. Detach the 11 claws and guide.
4. Disconnect the connector and detach the clamps and remove the lower instrument panel pad sub-assembly LH.

for Type B:
1. Put protective tape around the lower instrument panel pad sub-assembly LH.
  Text in Illustration
  *a
  Protective Tape
2. Remove the clip and screw.
3. Detach the 8 claws and 2 guides and remove the lower instrument panel pad sub-assembly LH.

10. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

for Type A:
1. Put protective tape around the No. 1 instrument panel finish panel cushion.
  Text in Illustration
  *a
  Protective Tape
2. Using a moulding remover B, detach the 4 claws and 3 clips and remove the No. 2 instrument panel finish panel cushion.

for Type B:
1. Put protective tape around the No. 1 instrument panel finish panel cushion.
  Text in Illustration
  *a
  Protective Tape
2. Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.

11. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

for Type A:
1. Put protective tape around the lower instrument panel pad sub-assembly RH.
  Text in Illustration
  *a
  Protective Tape
2. Remove the clip and screw.
3. Detach the 11 claws and guide and remove the lower instrument panel pad sub-assembly RH.

for Type B:
1. Put protective tape around the lower instrument panel pad sub-assembly RH.
  Text in Illustration
  *a
  Protective Tape
2. Remove the clip and screw.
3. Detach the 7 claws and remove the lower instrument panel pad sub-assembly RH.

12. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

for Type A:
1. Put protective tape around the lower center instrument cluster finish panel sub-assembly.
  Text in Illustration
  *a
  Protective Tape
2. Detach the 6 claws and remove the lower center instrument cluster finish panel sub-assembly.

for Type B:
1. Put protective tape around the lower center instrument cluster finish panel sub-assembly.
  Text in Illustration
  *a
  Protective Tape
2. Detach the 7 claws.
3. Disconnect the connectors and remove the lower center instrument cluster finish panel sub-assembly.

13. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

Land Cruiser. Urj200, 202 Grj200 Vdj200

Pull the air conditioning control assembly to detach the 4 claws, 2 clips on the backside of the air conditioning control assembly.

Disconnect the connectors and remove the air conditioning control assembly.