Air Conditioning Pressure Sensor Removal

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Heating Air Conditioning. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE FRONT BUMPER COVER

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

  3. REMOVE AIR CONDITIONER PRESSURE SENSOR

Air Conditioning Pressure Sensor -- Removal



1. REMOVE FRONT BUMPER COVER

  1. for Standard:
    (Click here)

  1. w/ Winch:
    (Click here)



2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

  1. Start the engine.

  1. Turn the A/C switch on.

  1. Operate the cooler compressor while the engine speed is approximately 1000 rpm for 5 to 6 minutes to circulate the refrigerant and collect the compressor oil remaining in each component into the cooler compressor.

  1. Stop the engine.

  1. Recover the refrigerant from the A/C system using a refrigerant recovery unit.



3. REMOVE AIR CONDITIONER PRESSURE SENSOR


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the connector.

  1. Remove the pressure sensor.

  1. Remove O-ring from the pressure sensor.

    NOTICE:
    Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.