Dtc B1448/48 Passenger Side Face Servo Motor Circuit

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Heating Air Conditioning. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

READ VALUE USING INTELLIGENT TESTER (AIR OUTLET DAMPER SERVO MOTOR)

CHECK AIR OUTLET DAMPER SERVO MOTOR (FOR FRONT PASSENGER SIDE MODE)

CHECK AIR CONDITIONING HARNESS ASSEMBLY

DTC B1448/48 Passenger Side FACE Servo Motor Circuit


DESCRIPTION

The air outlet damper servo motor (for front passenger side mode) sends pulse signals to inform the air conditioning amplifier assembly of the damper position. The air conditioning amplifier assembly activates the motor (normal or reverse) based on the signals to move the air outlet damper (for front passenger side mode) to any position, which controls the air outlet changes.
HINT:
Confirm that no mechanical problem is present because this trouble code can be output when either a damper link or damper is mechanically locked.

DTC Code
DTC Detection Condition
Trouble Area
B1448/48
The air outlet damper position does not change even if the air conditioning amplifier assembly operates the air outlet damper servo motor.
  1. Air outlet damper servo motor (for front passenger side mode)
  2. Air conditioning harness assembly
  3. Air conditioning amplifier assembly

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).
Dtc
  B1448/48  Passenger Side Face Servo Motor Circuit


Land Cruiser. Urj200, 202 Grj200 Vdj200.Heating Air Conditioning.Air Conditioning System (For Automatic Air Conditioning System).
Dtc
  B1448/48  Passenger Side Face Servo Motor Circuit


INSPECTION PROCEDURE

1.READ VALUE USING INTELLIGENT TESTER (AIR OUTLET DAMPER SERVO MOTOR)
  1. Use the Data List to check if the servo motor is functioning properly.

    Air Conditioner
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    A/O Damper FACE Pos(P)
    Air outlet damper servo motor (for front passenger side mode) target pulse /
    Min.: 6, Max.: 117 (for LHD)
    Min.: 9, Max.: 120 (for RHD)
    for LHD
    1. FACE1: 117 (pulse)
    2. FACE2: 109 (pulse)
    3. B/L1: 93 (pulse)
    4. B/L2: 81 (pulse)
    5. FOOT-F: 41 (pulse)
    6. FOOT-R: 41 (pulse)
    7. FOOT-D: 52 (pulse)
    8. F/D: 18 (pulse)
    9. DEF: 6 (pulse)
    for RHD
    1. FACE1: 9 (pulse)
    2. FACE2: 17 (pulse)
    3. B/L1: 33 (pulse)
    4. B/L2: 45 (pulse)
    5. FOOT-F: 85 (pulse)
    6. FOOT-R: 85 (pulse)
    7. FOOT-D: 74 (pulse)
    8. F/D: 108 (pulse)
    9. DEF: 120 (pulse)
    -
    OK:
    The display is as specified in the normal condition.

    Result
    Result
    Proceed to
    OK (Checking from the DTC)
    A
    OK (Checking from the PROBLEM SYMPTOMS TABLE)
    B
    NG
    C


B
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)

C
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY (Click here)
A


2.CHECK AIR OUTLET DAMPER SERVO MOTOR (FOR FRONT PASSENGER SIDE MODE)
  1. Replace the air outlet damper servo motor (for front passenger side mode).

    1. for LHD: Click here
    2. for RHD: Click here
    HINT:
    Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a normal one.
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    Result
    Result
    Proceed to
    DTC B1448/482 is not output
    A
    DTC B1448/48 is output
    B


B
Go to step 3
A

END (AIR OUTLET DAMPER SERVO MOTOR [FOR FRONT PASSENGER SIDE MODE] IS DEFECTIVE)

3.CHECK AIR CONDITIONING HARNESS ASSEMBLY
  1. Replace the air conditioning harness assembly.

    1. for LHD: Click here
    2. for RHD: Click here
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    Result
    Result
    Proceed to
    DTC B1448/48 is not output
    A
    DTC B1448/48 is output
    B


B
REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY (Click here)
A

END (AIR CONDITIONING HARNESS ASSEMBLY IS DEFECTIVE)