Seat Belt Warning System Data List / Active Test

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Seat Belt. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. READ DATA LIST

  1. PERFORM ACTIVE TEST

Seat Belt Warning System -- Data List / Active Test



READ DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

  1. Connect the GTS to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the GTS on.

  4. Enter the following menus: Body / (desired system) / Data List.

  5. According to the display on the GTS, read the Data List.

    Combination Meter
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    P-Seatbelt Buckle SW
    		Front passenger side seat belt buckle signal / ON or OFF
    		ON: Front passenger side seat belt is fastened
    OFF: Front passenger side seat belt is unfastened
    		-
    Passenger Occupant Detection Switch
    		Occupant detection sensor signal / ON or OFF
    		ON: Front passenger seat occupied
    OFF: Front passenger seat not occupied
    		-
    D - Seatbelt Warning Buzzer*
    		Driver side seat belt warning signal / ON or OFF
    		ON: Driver side seat belt warning buzzer is sound
    OFF: Driver side seat belt warning buzzer is not sound
    		The current customize setting is displayed.
    P - Seatbelt Warning Buzzer*
    		Front passenger side seat belt warning signal / ON or OFF
    		ON: Front passenger side seat belt warning buzzer is sound
    OFF: Front passenger side seat belt warning buzzer is not sound
    		The current customize setting is displayed.
    *: w/ Seat Belt Warning Buzzer

    SRS Airbag
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Driver Buckle SW
    		Driver side seat belt / Set, Unset or NG
    		Set: Driver side seat belt is fastened
    Unset: Driver side seat belt is unfastened
    		NG: Data is not determined


PERFORM ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the GTS to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the GTS on.

  4. Enter the following menus: Body / Combination Meter / Active Test.

  5. According to display on the GTS, perform the Active Test.

    Combination Meter
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Driver Side Seat Belt
    		Driver side seat belt warning light
    		ON/OFF
    		-
    Front Passenger Side Seat Belt
    		Front passenger side seat belt warning light
    		ON/OFF
    		-