Front Seat Cushion Heater Installation

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Seat. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH

  2. INSTALL FRONT SEPARATE TYPE SEAT CUSHION COVER

  3. INSTALL SEAT CUSHION COVER WITH PAD

  4. INSTALL FRONT POWER SEAT SWITCH LH

  5. INSTALL FRONT INNER SEAT CUSHION SHIELD LH

  6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

  7. INSTALL FRONT SEAT CUSHION SHIELD LH

  8. INSTALL RECLINING POWER SEAT SWITCH KNOB

  9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

  10. INSTALL FRONT SEAT ASSEMBLY LH

Front Seat Cushion Heater -- Installation


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. Use the same procedure for the RH and LH sides.
  4. The procedure listed below is for the LH side.


1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH

  1. Set the front seat cushion heater assembly LH onto the front separate type seat cushion cover so that the name stamp is facing the front separate type seat cushion pad.



  1. w/o Climate Control Seat System:
    Install the front seat cushion heater assembly LH to the front separate type seat cushion cover with new tack pins.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Front Seat Cushion Heater Installation


    Text in Illustration
    *1
    		Tack Pin
    		*2
    		Front Separate Type Seat Cushion Cover
    *3
    		Front Seat Cushion Heater Assembly LH
    		*4
    		Name Stamp


  1. w/ Climate Control Seat System:
    Install the front seat cushion heater assembly LH to the front separate type seat cushion cover with new tack pins.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Front Seat Cushion Heater Installation


    Text in Illustration
    *1
    		Tack Pin
    		*2
    		Front Separate Type Seat Cushion Cover
    *3
    		Front Seat Cushion Heater Assembly LH
    		*4
    		Name Stamp


2. INSTALL FRONT SEPARATE TYPE SEAT CUSHION COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Front Seat Cushion Heater Installation

  1. Using hog ring pliers, install the front separate type seat cushion cover to the front separate type seat cushion pad with new hog rings.

    Text in Illustration
    *1
    		Hog Ring Pliers
    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, avoid wrinkling the cover.


3. INSTALL SEAT CUSHION COVER WITH PAD

  1. Set the seat cushion cover with pad in place.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the hooks to install the seat cushion cover with pad.

  1. Bend the 2 seat frame claws downward.



  1. for Front Passenger Side:



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Attach the 2 clamps to connect the connector holder.

    2. Connect the connector.



  1. w/o Climate Control Seat System:



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Connect the connector and attach the wire harness clamp.



      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Connect the connector and attach the 2 wire harness clamps.



  1. w/ Climate Control Seat System:



      Land Cruiser. Urj200, 202 Grj200 Vdj200

    1. Attach the wire harness clamp.



      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Connect the 2 connectors and attach the 4 wire harness clamps.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the 2 clips.



4. INSTALL FRONT POWER SEAT SWITCH LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Install the front power seat switch LH with the 3 screws.

  1. w/ Seat Position Memory System:
    Connect the 2 connectors.

  1. w/o Seat Position Memory System:
    Connect the connector.



5. INSTALL FRONT INNER SEAT CUSHION SHIELD LH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws and clip to install the front inner seat cushion shield LH.

  1. Install the screw.



6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

  1. Install the front seat belt anchor plate.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Front Seat Cushion Heater Installation

  1. Install the front seat inner belt assembly with the nut.

    Torque:
    42 N*m{428 kgf*cm, 31 ft.*lbf}
    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

  1. Connect the connectors and attach the clamps.



7. INSTALL FRONT SEAT CUSHION SHIELD LH

  1. for Driver Side:
    Connect the connector.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the front seat cushion shield LH together with the front inner No. 1 cushion shield LH.

  1. Install the 3 screws.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Connect the 2 rubber bands.

  1. Install the 2 screws.



8. INSTALL RECLINING POWER SEAT SWITCH KNOB


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the reclining power seat switch knob.



9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the slide and vertical power seat switch knob.



10. INSTALL FRONT SEAT ASSEMBLY LH
(Click here)