Seat Heater Switch (W/ Seat Heater System) Installation

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200

Seat. Land Cruiser. Urj200, 202 Grj200 Vdj200

INSTALL SEAT HEATER SWITCH
INSTALL SUSPENSION CONTROL SWITCH
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY
INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH
INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION
INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH
INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

Seat Heater Switch (W/ Seat Heater System) -- Installation

HINT:

Use the same procedures for LHD and RHD vehicles.
The procedures listed below are for LHD vehicles.

1. INSTALL SEAT HEATER SWITCH

Land Cruiser. Urj200, 202 Grj200 Vdj200

Attach the 2 claws to install the heater switch.

2. INSTALL SUSPENSION CONTROL SWITCH

Land Cruiser. Urj200, 202 Grj200 Vdj200

Attach the 4 claws to install the control switch.

Land Cruiser. Urj200, 202 Grj200 Vdj200

Connect the 2 connectors.

Attach the wire harness clamp.

3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

for Type A:
1. Attach the 8 claws and 4 clips to install the upper console panel sub-assembly.

for Type B:
1. Connect the connectors.
2. Attach the 14 claws to install the console panel.

4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY

Land Cruiser. Urj200, 202 Grj200 Vdj200

Attach the 4 claws to install the console cup holder box sub-assembly.

5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

Land Cruiser. Urj200, 202 Grj200 Vdj200

Attach the 4 claws, clip and 3 guides to install the rear upper console panel sub-assembly.

6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

for Type A:
1. Attach the 6 claws to install the lower center instrument cluster finish panel sub-assembly.

for Type B:
1. Connect the connectors.
2. Attach the 7 claws to install the lower center instrument cluster finish panel sub-assembly.

7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

for Type A, for Automatic Transmission:
1. Install the shift lever knob sub-assembly and twist it in the direction indicated by the arrow.

for Type A, for Manual Transmission:
1. Install the shift lever knob sub-assembly and twist it in the direction indicated by the arrow.

for Type B:
1. Install the shift lever knob sub-assembly and twist it in the direction indicated by the arrow.
  
  Text in Illustration
  *A
  for Automatic Transmission
  *B
  for Manual Transmission

8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

for Type A:
1. Attach the 11 claws and guide to install the lower instrument panel pad sub-assembly RH.
2. Install the screw and clip.

for Type B:
1. Attach the 7 claws to install the lower instrument panel pad sub-assembly RH.
2. Install the screw and clip.

9. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

for Type A:
1. Attach the 4 claws and 3 clips to install the No. 1 instrument panel finish panel cushion.

for Type B:
1. Attach the 7 claws to install the panel No. 1 instrument panel finish panel cushion.

10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

for Type A:
1. Connect the connectors and clamps.
2. Attach the 11 claws and guide to install the lower instrument panel pad sub-assembly LH.
3. Install the screw and clip.

for Type B:
1. Connect the connectors and clamps.
2. Attach the 8 claws and 2 guides to install the lower instrument panel pad sub-assembly LH.
3. Install the screw and clip.

11. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

for Type A:
1. Attach the 4 claws and 3 clips to install the No. 2 instrument panel finish panel cushion.

for Type B:
1. Attach the 7 claws to install the No. 2 instrument panel finish panel cushion.