Power Seat Switch (W/O Seat Position Memory System) Inspection

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Seat. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT FRONT POWER SEAT SWITCH LH

  2. INSPECT FRONT POWER SEAT SWITCH RH

Power Seat Switch (W/O Seat Position Memory System) -- Inspection



1. INSPECT FRONT POWER SEAT SWITCH LH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Power Seat Switch (W/O Seat Position Memory System) Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Slide Switch:
    Tester Connection
    		Switch Condition
    		Specified Condition
    9 (SLD+) - 1 (+B)
    		Front
    		Below 1 Ω
    6 (SLD-) - 4 (GND)
    9 (SLD+) - 4 (GND)
    		Off
    6 (SLD-) - 4 (GND)
    9 (SLD+) - 4 (GND)
    		Rear
    6 (SLD-) - 1 (+B)
    Front Vertical Switch:
    Tester Connection
    		Switch Condition
    		Specified Condition
    10 (FRV+) - 1 (+B)
    		Up
    		Below 1 Ω
    5 (FRV-) - 4 (GND)
    10 (FRV+) - 4 (GND)
    		Off
    5 (FRV-) - 4 (GND)
    10 (FRV+) - 4 (GND)
    		Down
    5 (FRV-) - 1 (+B)
    Lifter Switch:
    Tester Connection
    		Switch Condition
    		Specified Condition
    7 (LFT+) - 1 (+B)
    		Up
    		Below 1 Ω
    8 (LFT-) - 4 (GND)
    7 (LFT+) - 4 (GND)
    		Off
    8 (LFT-) - 4 (GND)
    7 (LFT+) - 4 (GND)
    		Down
    8 (LFT-) - 1 (+B)
    Reclining Switch:
    Tester Connection
    		Switch Condition
    		Specified Condition
    3 (RCL+) - 1 (+B)
    		Front
    		Below 1 Ω
    2 (RCL-) - 4 (GND)
    3 (RCL+) - 4 (GND)
    		Off
    2 (RCL-) - 4 (GND)
    3 (RCL+) - 4 (GND)
    		Rear
    2 (RCL-) - 1 (+B)
    If the result is not as specified, replace the front power seat switch LH.


2. INSPECT FRONT POWER SEAT SWITCH RH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Power Seat Switch (W/O Seat Position Memory System) Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Slide Switch:
    Tester Connection
    		Switch Condition
    		Specified Condition
    9 (SLDF) - 1 (+B2)
    		Front
    		Below 1 Ω
    6 (SLDR) - 4 (GND2)
    9 (SLDF) - 4 (GND2)
    		Off
    6 (SLDR) - 4 (GND2)
    9 (SLDF) - 4 (GND2)
    		Rear
    6 (SLDR) - 1 (+B2)
    Front Vertical Switch:
    Tester Connection
    		Switch Condition
    		Specified Condition
    5 (FUP) - 1 (+B2)
    		Up
    		Below 1 Ω
    10 (FDWN) - 4 (GND2)
    5 (FUP) - 4 (GND2)
    		Off
    10 (FDWN) - 4 (GND2)
    5 (FUP) - 4 (GND2)
    		Down
    10 (FDWN) - 1 (+B2)
    Lifter Switch:
    Tester Connection
    		Switch Condition
    		Specified Condition
    8 (LUP) - 1 (+B2)
    		Up
    		Below 1 Ω
    7 (LDWN) - 4 (GND2)
    8 (LUP) - 4 (GND2)
    		Off
    7 (LDWN) - 4 (GND2)
    8 (LUP) - 4 (GND2)
    		Down
    7 (LDWN) - 1 (+B2)
    Reclining Switch:
    Tester Connection
    		Switch Condition
    		Specified Condition
    3 (RCLF) - 1 (+B2)
    		Front
    		Below 1 Ω
    2 (RCLR) - 4 (GND2)
    3 (RCLF) - 4 (GND2)
    		Off
    2 (RCLR) - 4 (GND2)
    3 (RCLR) - 4 (GND2)
    		Rear
    2 (RCLR) - 1 (+B2)
    If the result is not as specified, replace the front power seat switch RH.