Seat. Rear No. 2 Seat Assembly (Except Face To Face Seat Type) Reassembly

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200

Seat. Land Cruiser. Urj200, 202 Grj200 Vdj200

INSTALL NO. 2 SEAT RECLINING RELEASE HANDLE SUB-ASSEMBLY
INSTALL REAR SEATBACK LOCK STRIKER COVER LH
INSTALL REAR NO. 2 SEATBACK COVER LH
INSTALL REAR SEATBACK LOCK STRIKER ASSEMBLY LH
INSTALL REAR SEAT LOCK CONTROL CABLE
INSTALL REAR INNER SEAT RECLINING COVER RH
INSTALL REAR INNER SEAT RECLINING COVER LH
INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY LH
INSTALL SEATBACK COVER WITH PAD
INSTALL REAR SEAT HEADREST HANDLE
INSTALL REAR SEAT HEADREST ASSEMBLY (w/ Folding Headrest)
INSTALL REAR SEAT HEADREST ASSEMBLY (w/o Folding Headrest)
INSTALL REAR SEAT HINGE PAWL GUIDE
INSTALL REAR SEAT HINGE PAWL GUIDE
INSTALL REAR LOWER SEATBACK LOCK BEZEL
INSTALL REAR NO. 2 SEATBACK CUSHION
INSTALL NO. 3 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY
INSTALL NO. 2 SEAT STAY SUB-ASSEMBLY
INSTALL NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH
INSTALL NO. 3 SEAT CUSHION PAD LH
INSTALL SEAT CUSHION COVER WITH PAD
INSTALL NO. 2 BOTTLE HOLDER
INSTALL CAP
INSTALL REAR SEAT CUSHION CARPET
INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY
INSTALL REAR CENTER SEAT INNER BELT LH (w/ Rear Center Seat Headrest)
INSTALL REAR CENTER SEAT INNER BELT RH (w/ Rear Center Seat Headrest)
INSTALL SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY LH
INSTALL SEAT STAND FRAME CAP
INSTALL REAR SEAT LOCK COVER LH
INSTALL NO. 3 SEAT LEG COVER NO. 2
INSTALL NO. 3 SEAT FRONT BRACKET COVER LH
INSTALL REAR SEAT CUSHION UNDER COVER LH
INSTALL 3RD SEAT CUSHION LOCK COVER
INSTALL 3RD SEAT LINK SUB-ASSEMBLY LH
INSTALL NO. 2 SEAT LEG COVER NO. 2
INSTALL REAR NO. 3 SEAT LEG COVER LH
INSTALL REAR SEAT REAR BRACKET COVER REAR
INSTALL RECLINING ADJUSTER COVER RH
INSTALL RECLINING ADJUSTER COVER LH
INSTALL NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH
INSTALL SEAT ADJUSTER BOLT COVER

Rear No. 2 Seat Assembly (Except Face To Face Seat Type) -- Reassembly

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:

Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.

1. INSTALL NO. 2 SEAT RECLINING RELEASE HANDLE SUB-ASSEMBLY

Install the release handle with the bolt.

2. INSTALL REAR SEATBACK LOCK STRIKER COVER LH

Attach the 2 clamps to install the cover.

3. INSTALL REAR NO. 2 SEATBACK COVER LH

Attach the 3 claws to install the cover.

4. INSTALL REAR SEATBACK LOCK STRIKER ASSEMBLY LH

Install the lock striker with the 2 nuts.
Torque:
14 N*m{138 kgf*cm, 10 ft.*lbf}

5. INSTALL REAR SEAT LOCK CONTROL CABLE

Attach the 2 clamps to install the lock control cable.

Attach the 2 cable clamps to connect the 2 cables.

6. INSTALL REAR INNER SEAT RECLINING COVER RH

Attach the claw to install the cover.

Install the screw.

7. INSTALL REAR INNER SEAT RECLINING COVER LH

Attach the claw to install the cover.

Install the screw.

8. INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY LH

Land Cruiser. Urj200, 202 Grj200 Vdj200.Seat.Front Power Seat Control System (W/ Seat Position Memory System).Rear No. 2 Seat Assembly (Except Face To Face Seat Type) Reassembly

Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.
NOTICE:
1. Be careful not to damage the cover.
2. When installing the hog rings, avoid wrinkling the cover.
Text in Illustration
*1
Hog Ring Pliers

Text in Illustration
*1	Hog Ring Pliers

9. INSTALL SEATBACK COVER WITH PAD

Using hog ring pliers, install the seatback cover with pad to the seatback frame with a new hog rings.

LH Side:
1. w/ Rear Center Seat Headrest:
  1. Attach the 8 claws to install the 4 headrest supports.
  2. Install the rear seat protector.
  3. Insert the center headrest storage bag.
  4. Attach the 2 hooks.
  5. Close the fastener.
2. w/o Rear Center Seat Headrest:
  1. Attach the 4 claws to install the 2 headrest supports.
  2. Install the rear seat protector.
  3. Attach the hook.

RH Side:
1. Attach the 4 claws to install the 2 headrest supports.
2. Install the rear seat protector.
3. Attach the hook.

10. INSTALL REAR SEAT HEADREST HANDLE

Install the snap ring to the headrest handle.

Install the headrest handle to the headrest.

11. INSTALL REAR SEAT HEADREST ASSEMBLY (w/ Folding Headrest)

While releasing the lock inside the headrest support with a screwdriver, install the headrest.
HINT:
Tape the screwdriver tip before use.
Text in Illustration
*1
Protective Tape

Text in Illustration
*1	Protective Tape

12. INSTALL REAR SEAT HEADREST ASSEMBLY (w/o Folding Headrest)

13. INSTALL REAR SEAT HINGE PAWL GUIDE

Install the guide with the screw.

14. INSTALL REAR SEAT HINGE PAWL GUIDE

Attach the 5 claws to install the guide.

15. INSTALL REAR LOWER SEATBACK LOCK BEZEL

Attach the 3 claws and clip to install the seatback lock bezel.

16. INSTALL REAR NO. 2 SEATBACK CUSHION

Install the seatback cushion with the screw.

17. INSTALL NO. 3 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY

Attach the 2 clamps to install the 2 cables.

Attach the 2 cable clamps to connect the 2 cables.

18. INSTALL NO. 2 SEAT STAY SUB-ASSEMBLY

Install the seat stay with the bolt.

19. INSTALL NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH

w/o Bottle Holder:
1. Attach the fastening tape to install the seatback cover.
2. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
  NOTICE:
  1. Be careful not to damage the cover.
  2. When installing the hog rings, avoid wrinkling the cover.
  Text in Illustration
  *1
  Hog Ring Pliers
  *2
  Fastening Tape

Text in Illustration
*1	Hog Ring Pliers
*2	Fastening Tape

w/ Bottle Holder:
1. Attach the 3 fastening tapes to install the seatback cover.
2. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
  NOTICE:
  1. Be careful not to damage the cover.
  2. When installing the hog rings, avoid wrinkling the cover.
  Text in Illustration
  *1
  Hog Ring Pliers
  *2
  Fastening Tape

Text in Illustration
*1	Hog Ring Pliers
*2	Fastening Tape

20. INSTALL NO. 3 SEAT CUSHION PAD LH

21. INSTALL SEAT CUSHION COVER WITH PAD

22. INSTALL NO. 2 BOTTLE HOLDER

Install the No. 2 bottle holder with the 2 screws.

23. INSTALL CAP

Attach the 4 claws to install the 2 caps.

24. INSTALL REAR SEAT CUSHION CARPET

Install the seat cushion carpet with new tack pins.

25. INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY

Install the 2 belts.

NOTICE:
1. Make sure the claws are facing away from the seat.
2. Do not overlap the anchor part of the seat belt and protruding parts of the seat.

26. INSTALL REAR CENTER SEAT INNER BELT LH (w/ Rear Center Seat Headrest)

Install the belt with the nut.
Torque:
42 N*m{428 kgf*cm, 31 ft.*lbf}
NOTICE:
Do not overlap the anchor part of the seat belt and protruding parts of the seat.
HINT:
The rear No. 2 seat inner belt is fixed with the same nut as the rear seat inner belt. Therefore, connect it when installing the rear seat inner belt.

27. INSTALL REAR CENTER SEAT INNER BELT RH (w/ Rear Center Seat Headrest)

Install the belt with the nut.
Torque:
42 N*m{428 kgf*cm, 31 ft.*lbf}
NOTICE:
Do not overlap the anchor part of the seat belt and protruding parts of the seat.
HINT:
The rear No. 2 seat inner belt is fixed with the same nut as the rear seat outer belt. Therefore, connect it when installing the rear seat outer belt.

28. INSTALL SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY LH