Rear No. 1 Seat Assembly (For Bench Seat Type) Reassembly

Install the rear seat cushion spacer to the rear seat cushion support spring.

Install the rear seat cushion support spring to the rear seat cushion frame sub-assembly with the 2 rear seat hinge set plates.

Install the rear seat hinge sub-assembly LH to the rear seat cushion frame sub-assembly with the 2 rear seat hinge pins.

Install 2 new E-rings.

Install the fold seat lock collar to the rear seat lock assembly LH.

Install the rear seat lock assembly LH to the rear seat cushion frame sub-assembly.

Install the rear seat No. 1 cushion spring.

Temporarily install the rear No. 1 seat inner belt assembly LH.

NOTICE:

Do not allow the anchor part of the rear No. 1 seat inner belt assembly LH to overlap the protruding parts of the rear seat.

Install the rear seat inner belt assembly with the bolt.

Torque:

42 N*m{428 kgf*cm, 31 ft.*lbf}

NOTICE:

Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the rear No. 1 seat inner belt assembly LH.

Close the 2 fasteners and attach the fastening tape.

Temporarily install the rear No. 1 seat inner belt assembly RH.

NOTICE:

Do not allow the anchor part of the rear No. 1 seat inner belt assembly RH to overlap the protruding parts of the rear seat.

Install the rear seat outer belt assembly with the bolt.

Torque:

42 N*m{428 kgf*cm, 31 ft.*lbf}

NOTICE:

Do not allow the anchor part of the rear No. 1 seat outer belt assembly to overlap the protruding parts of the rear seat inner belt assembly RH.

Attach the 2 cable clamps to install the rear seat lock control cable to the rear seat cushion frame sub-assembly.

Pass the 2 cable ends B through the 2 holes of the rear seat cushion frame sub-assembly as shown in the illustration.

Insert and twist the 2 cable ends B to connect them to both sides of the rear seat lock assembly as shown in the illustration.

Attach the 2 cable clamps.

Insert and twist the 2 cable ends A to connect them to both sides of the rear seat cushion frame sub-assembly as shown in the illustration.

Attach the 2 cable clamps.

Install the 2 tension springs to both sides of the rear seat cushion frame sub-assembly as shown in the illustration.

Install the rear seat hinge cover to the rear seat reclining adjuster assembly LH.

Install the rear seat reclining adjuster assembly LH to the rear seat cushion frame sub-assembly with the 2 bolts.

Torque:

37 N*m{377 kgf*cm, 27 ft.*lbf}

Install the rear seatback lock cover to the rear seat lock assembly LH with the 2 screws.

Temporarily install the bench type rear seat cushion cover to the rear No. 1 seat cushion pad.

Using hog ring pliers, install new hog rings.

NOTICE:

1. Be careful not to damage the cover.
   
2. When installing the hog rings, avoid wrinkling the cover.
   

Using hog ring pliers, install new hog rings.

NOTICE:

1. Be careful not to damage the cover.
   
2. When installing the hog rings, avoid wrinkling the cover.
   

Set the seat cushion cover with pad in place.

Using hog ring pliers, install the seat cushion cover with pad to the rear seat cushion frame sub-assembly with new hog rings.

NOTICE:

1. Be careful not to damage the cover.
   
2. When installing the hog rings, avoid wrinkling the cover.
   

Attach the 2 hooks.

Attach the fastening tape and close the 2 fasteners.

Install the rear seat turn lock cover with the 2 screws.

Install the fold seat stopper band assembly together with the rear seat cushion with the screw.

Install the rear seat cushion with the screw.

Install the rear seatback frame sub-assembly with the 4 bolts.

Torque:

37 N*m{377 kgf*cm, 27 ft.*lbf}

Attach the 8 cable clamps to install the No. 2 seat adjuster control cable assembly.

Connect the 4 cable ends to both sides of the rear seat reclining adjuster assembly as shown in the illustration.

Attach the 4 cable clamps to both sides of the rear seat reclining adjuster assembly as shown in the illustration.

Attach the guide to install the rear seat No. 1 reclining cover LH.

Install the screw.

Temporarily install the bench type rear seatback cover to the bench type rear seatback pad.

Using hog ring pliers, install new hog rings.

NOTICE:

1. Be careful not to damage the cover.
   
2. When installing the hog rings, avoid wrinkling the cover.
   

Set the seatback cover with pad in place.

Install the seatback cover.

Install the 2 clips.

Attach the 4 claws to install the 2 rear seat headrest supports.

HINT:

Use the same procedure to install the 2 rear seat headrest supports on the other side.

Close the 2 fasteners and attach the 2 hooks.

Install the No. 1 reclining adjuster release handle LH with the screw.

Attach the 2 claws to install the seat adjuster cover to the No. 1 reclining adjuster release handle LH.

Attach the hook to install the reclining remote control bezel.

Install the screw.

Install the reclining remote control lever knob with the screw.

Install the rear seat headrest assembly.