Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Seat. Land Cruiser. Urj200, 202 Grj200 Vdj200
Front Power Seat Control System (W/ Seat Position Memory System) -- Terminals Of Ecu |
| CHECK POSITION CONTROL ECU AND SWITCH (for LHD) |
Disconnect the c14 and c15 switch connectors.
Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition c14-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω c14-5 (+B) - c14-1 (GND) L - W-B Power source Always 11 to 14 V c15-4 (IG) - c14-1 (GND) G - W-B Engine switch signal Engine switch off Below 1 V Engine switch on (IG) 11 to 14 V c15-8 (SYSB) - c14-1 (GND) R - W-B System power source Always 11 to 14 V Reconnect the c14 and c15 switch connectors.
Measure the voltage according to the value(s) in the table below.
If the result is not as specified, the position control ECU and switch may have a malfunction.Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition c14-2 (SLD+) - c14-1 (GND) B - W-B Sliding motor signal (forward) Slide switch off Below 1 V Slide switch front on 11 to 14 V c14-3 (SLD-) - c14-1 (GND) P - W-B Sliding motor signal (rearward) Slide switch off Below 1 V Slide switch rear on 11 to 14 V c14-6 (FRV+) - c14-1 (GND) R - W-B Front vertical motor signal (upward) Front vertical switch off Below 1 V Front vertical switch up on 11 to 14 V c14-4 (FRV-) - c14-1 (GND) LG - W-B Front vertical motor signal (downward) Front vertical switch off Below 1 V Front vertical switch down on 11 to 14 V c14-7 (LFT+) - c14-1 (GND) G - W-B Lifter motor signal (upward) Lifter switch off Below 1 V Lifter switch up on 11 to 14 V c14-9 (LFT-) - c14-1 (GND) W - W-B Lifter motor signal (downward) Lifter switch off Below 1 V Lifter switch down on 11 to 14 V c14-8 (RCL+) - c14-1 (GND) GR - W-B Reclining motor signal (forward) Reclining switch off Below 1 V Reclining switch front on 11 to 14 V c14-10 (RCL-) - c14-1 (GND) Y - W-B Reclining motor signal (rearward) Reclining switch off Below 1 V Reclining switch rear on 11 to 14 V
| CHECK POSITION CONTROL ECU AND SWITCH (for RHD) |
Disconnect the c26 and c27 switch connectors.
Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition c26-1 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω c26-5 (+B) - c26-1 (GND) L - W-B Power source Always 11 to 14 V c27-4 (IG) - c26-1 (GND) G - W-B Engine switch signal Engine switch off Below 1 V Engine switch on (IG) 11 to 14 V c27-8 (SYSB) - c26-1 (GND) R - W-B System power source Always 11 to 14 V Reconnect the c26 and c27 switch connectors.
Measure the voltage according to the value(s) in the table below.
If the result is not as specified, the position control ECU and switch may have a malfunction.Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition c26-2 (SLD+) - c26-1 (GND) B - W-B Sliding motor signal (forward) Slide switch off Below 1 V Slide switch front on 11 to 14 V c26-3 (SLD-) - c26-1 (GND) P - W-B Sliding motor signal (rearward) Slide switch off Below 1 V Slide switch rear on 11 to 14 V c26-6 (FRV+) - c26-1 (GND) R - W-B Front vertical motor signal (upward) Front vertical switch off Below 1 V Front vertical switch up on 11 to 14 V c26-4 (FRV-) - c26-1 (GND) LG - W-B Front vertical motor signal (downward) Front vertical switch off Below 1 V Front vertical switch down on 11 to 14 V c26-7 (LFT+) - c26-1 (GND) G - W-B Lifter motor signal (upward) Lifter switch off Below 1 V Lifter switch up on 11 to 14 V c26-9 (LFT-) - c26-1 (GND) W - W-B Lifter motor signal (downward) Lifter switch off Below 1 V Lifter switch down on 11 to 14 V c26-8 (RCL+) - c26-1 (GND) GR - W-B Reclining motor signal (forward) Reclining switch off Below 1 V Reclining switch front on 11 to 14 V c26-10 (RCL-) - c26-1 (GND) Y - W-B Reclining motor signal (rearward) Reclining switch off Below 1 V Reclining switch rear on 11 to 14 V
| CHECK OUTER MIRROR CONTROL ECU (for LHD) |
Disconnect the I17 and I18 ECU connectors.
Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition I18-10 (MSWE) - I17-9 (GND) BR - W-B Ground for seat memory switch Always Below 1 Ω I17-9 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω I17-3 (B) - I17-9 (GND) R - W-B Battery (ECU power source) Always 11 to 14 V I17-4 (ACC) - I17-9 (GND) GR - W-B Engine switch (ACC) power source supply Engine switch off Below 1 V Engine switch on (ACC) 11 to 14 V Reconnect the I17 and I18 ECU connectors.
Measure the voltage according to the value(s) in the table below.
If the result is not as specified, the outer mirror control ECU may have a malfunction.Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition I18-6 (M3) - I18-10 (MSWE) B - BR Seat memory switch 3 signal for seat memory switch Seat memory switch 3 on 11 to 14 V Seat memory switch 3 off Below 1 V I18-7 (M2) - I18-10 (MSWE) W - BR Seat memory switch 2 signal for seat memory switch Seat memory switch 2 on 11 to 14 V Seat memory switch 2 off Below 1 V I18-8 (M1) - I18-10 (MSWE) G - BR Seat memory switch 1 signal for seat memory switch Seat memory switch 1 on 11 to 14 V Seat memory switch 1 off Below 1 V I18-9 (MM) - I18-10 (MSWE) B - BR Seat memory SET switch signal for seat memory switch Seat memory SET switch on 11 to 14 V Seat memory SET switch off Below 1 V
| CHECK OUTER MIRROR CONTROL ECU (for RHD) |
Disconnect the I23 and I24 ECU connectors.
Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition I24-10 (MSWE) - I23-9 (GND) BR - W-B Ground for seat memory switch Always Below 1 Ω I23-9 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω I23-3 (B) - I23-9 (GND) R - W-B Battery (ECU power source) Always 11 to 14 V I23-4 (ACC) - I23-9 (GND) GR - W-B Engine switch (ACC) power source supply Engine switch off Below 1 V Engine switch on (ACC) 11 to 14 V Reconnect the I23 and I24 ECU connectors.
Measure the voltage according to the value(s) in the table below.
If the result is not as specified, the outer mirror control ECU may have a malfunction.Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition I24-6 (M3) - I24-10 (MSWE) B - BR Seat memory switch 3 signal for seat memory switch Seat memory switch 3 on 11 to 14 V Seat memory switch 3 off Below 1 V I24-7 (M2) - I24-10 (MSWE) W - BR Seat memory switch 2 signal for seat memory switch Seat memory switch 2 on 11 to 14 V Seat memory switch 2 off Below 1 V I24-8 (M1) - I24-10 (MSWE) G - BR Seat memory switch 1 signal for seat memory switch Seat memory switch 1 on 11 to 14 V Seat memory switch 1 off Below 1 V I24-9 (MM) - I24-10 (MSWE) B - BR Seat memory SET switch signal for seat memory switch Seat memory SET switch on 11 to 14 V Seat memory SET switch off Below 1 V