Pre-Crash Safety System Precaution

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Pre-Crash Safety. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. IGNITION SWITCH EXPRESSION

  1. TROUBLESHOOTING PRECAUTIONS

  1. HANDLING PRECAUTIONS

Pre-Crash Safety System -- Precaution



1.IGNITION SWITCH EXPRESSION

HINT:
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression
Ignition Switch (position)
Engine Switch (condition)
Ignition Switch off
LOCK
Off
Ignition Switch ACC
ACC
On (ACC)
Ignition Switch ON
ON
On (IG)
Engine Start
START
Start

2.TROUBLESHOOTING PRECAUTIONS

  1. If a terminal contact point malfunction or part installation problem occurs, removal and reinstallation of the suspected part may return the system to normal. However, be aware that the normal condition may only be temporary.

  2. Before disconnecting connectors or removing/installing parts, determine the malfunctioning area by checking and writing down the condition of the vehicle at the time of the malfunction (DTC outputs, etc.).

  3. Be sure to check for DTCs related to other systems. The pre-crash safety system may be influenced by malfunctions in other systems.


3.HANDLING PRECAUTIONS

  1. When removing and installing the ECUs, sensors, switches or other pre-crash safety system related parts, perform the following:

    1. Make sure the ignition switch is off unless otherwise specified in the inspection procedures.
    2. After the removal/installation, check for DTCs and confirm that a normal system code is output.