Airbag Cut-Off Switch Removal

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Supplemental Restraint Systems. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE INSTRUMENT SIDE PANEL RH

  4. REMOVE AIRBAG CUT-OFF SWITCH

Airbag Cut-Off Switch -- Removal


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. PRECAUTION
CAUTION:
Be sure to read Precaution thoroughly before servicing (Click here).
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (- ) battery terminal notices before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE INSTRUMENT SIDE PANEL RH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Supplemental Restraint Systems.Airbag System.Airbag Cut-Off Switch Removal

  1. Put protective tape around the instrument side panel RH.

    Text in Illustration
    *a
    		Protective Tape

  1. Using a moulding remover A, detach the 6 claws and remove the instrument side panel RH.

  1. w/ Airbag Cut Off Switch:

    1. Disconnect the connector and remove the instrument side panel RH.



4. REMOVE AIRBAG CUT-OFF SWITCH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 2 claws and remove the airbag cutoff switch.