Light Control Rheostat Inspection

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Meter Gauge Display. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT LIGHT CONTROL RHEOSTAT

Light Control Rheostat -- Inspection



1. INSPECT LIGHT CONTROL RHEOSTAT


  1. Inspect the light control rheostat.



    1. Measure the resistance according to the value(s) in the table below.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Meter Gauge Display.Meter / Gauge System.Light Control Rheostat Inspection

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      6 (TC) - 1 (E)
      		TAIL cancel switch off → on
      		10 kΩ or higher → Below 1 Ω
      5 (T) - 1 (E)
      		Always
      		10 kΩ or higher
      7 (TR) - 1 (E)
      		Light control rheostat fully turned right → fully turned left
      		10 kΩ or higher → Below 100 Ω

  1. Inspect the trip switch.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      4 (A/B) - 1 (E)
      		Trip switch on (Pushed)
      		Below 200 Ω
      Trip switch off (Not Pushed)
      		1 MΩ or higher
      If the result is not as specified, replace the rheostat.