Meter / Gauge System Tachometer Malfunction

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Meter Gauge Display. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK CAN COMMUNICATION SYSTEM

PERFORM ACTIVE TEST USING GTS (TACHOMETER)

READ VALUE USING GTS (TACHOMETER)

READ VALUE USING GTS (ENGINE SPEED)

METER / GAUGE SYSTEM - Tachometer Malfunction


DESCRIPTION

The combination meter receives engine speed signals from the ECM via the CAN line. The combination meter displays engine speed data that is calculated based on the data received from the ECM.

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Meter Gauge Display.Meter / Gauge System.Meter / Gauge System Tachometer Malfunction


INSPECTION PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM

  1. Check for DTCs (Click here).

    Result
    Result
    		Proceed to
    CAN communication system DTC is not output
    		A
    CAN communication system (for LHD with Central Gateway ECU) DTC is output
    		B
    CAN communication system (for LHD without Central Gateway ECU) DTC is output
    		C
    CAN communication system (for RHD with Central Gateway ECU) DTC is output
    		D
    CAN communication system (for RHD without Central Gateway ECU) DTC is output
    		E


B
GO TO CAN COMMUNICATION SYSTEM (Click here)

C
GO TO CAN COMMUNICATION SYSTEM (Click here)

D
GO TO CAN COMMUNICATION SYSTEM (Click here)

E
GO TO CAN COMMUNICATION SYSTEM (Click here)
A


2.PERFORM ACTIVE TEST USING GTS (TACHOMETER)

  1. Operate the GTS according to the display and select Active Test (Click here).

    Combination Meter
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    TachoMeter Operation
    		Tachometer
    		0, 1000, 2000, 3000, 4000, 5000, 6000, 7000
    		Perform the test with the vehicle stopped and engine idling.
    HINT:
    Make sure that the vehicle is stopped and the engine is idling.
    OK:
    Needle indication is normal.


NG
REPLACE COMBINATION METER ASSEMBLY (Click here)
OK


3.READ VALUE USING GTS (TACHOMETER)

  1. Operate the GTS according to the display and select Data List (Click here).

    Combination Meter
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Engine Rpm
    		Engine speed/Min.: 0, Max.: 12750
    		Idling: 700 to 800
    		Unit: rpm
    OK:
    Engine speed displayed on the GTS is almost the same as actual engine speed.
    Result
    Result
    		Proceed to
    NG
    		A
    OK
    		B


B
REPLACE COMBINATION METER ASSEMBLY (Click here)
A


4.READ VALUE USING GTS (ENGINE SPEED)

  1. Operate the GTS according to the display and select Data List (Click here).

    Result
    Result
    		Proceed to
    Engine speed displayed on the GTS is almost same as actual engine speed
    		A
    Engine speed displayed on the GTS is not same as actual engine speed (for 1GR-FE)
    		B
    Engine speed displayed on the GTS is not same as actual engine speed (for 1UR-FE)
    		C
    Engine speed displayed on the GTS is not same as actual engine speed (for 3UR-FE)
    		D
    Engine speed displayed on the GTS is not same as actual engine speed (for 1VD-FTV)
    		E
    OK:
    Engine speed displayed on the GTS is almost the same as actual engine speed.


B
REPLACE ECM (Click here)

C
REPLACE ECM (Click here)

D
REPLACE ECM (Click here)

E
REPLACE ECM (Click here)
A

REPLACE COMBINATION METER ASSEMBLY (Click here)