Meter / Gauge System Operation Check

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Meter Gauge Display. Land Cruiser. Urj200, 202 Grj200 Vdj200
  1. INSPECT INDICATOR/WARNING LIGHT

  1. INSPECT SPEEDOMETER

  1. INSPECT TACHOMETER

  1. INSPECT METER/GAUGE

  1. INSPECT WARNING/INDICATOR LIGHT

  1. INSPECT ENGINE OIL LEVEL WARNING (except 3UR-FE)

  1. INSPECT MULTI-INFORMATION DISPLAY (w/ Multi-information Display)

Meter / Gauge System -- Operation Check



INSPECT INDICATOR/WARNING LIGHT
  1. Check the following indicators and warning lights.

    w/o Multi-information Display
    Indicator/Warning Light
    Switch Condition
    Specified Condition
    A/T OIL TEMP warning light*1
    Ignition switch off → ON
    Comes on for 3 seconds
    BRAKE warning light
    ABS warning light
    OIL LEVEL indicator light
    FUEL FILTER & SEDIMENTER indicator light*2
    SLIP indicator light*3
    VSC OFF indicator light*3
    WASHER indicator light
    RSCA OFF indicator light*4
    CRAWL indicator light*3
    SPEED LIMIT indicator light
    Eco driving indicator light
    TRC OFF indicator light*3
    Turn assist indicator light*3
    Multi-terrain select indicator light*5
    SRS warning light
    Ignition switch off → ON
    Comes on for 6 seconds
    CHARGE warning light
    Ignition switch off → ON
    Illuminates when ignition switch is turned to ON. Turns off when engine is started.
    MIL

    1. *1: for Automatic Transmission
    2. *2: for 1VD-FTV
    3. *3: w/ VSC
    4. *4: w/ Curtain Shield Airbag
    5. *5: w/ Multi-terrain Select

w/ Multi-information Display
Indicator/Warning Light
Switch Condition
Specified Condition
BRAKE warning light
Ignition switch off → ON
Comes on for 3 seconds
ABS warning light
SLIP indicator light
RSCA OFF indicator light*1
CRAWL indicator light
SPEED LIMIT indicator light
PCS indicator light*2
Eco driving indicator light
VSC OFF indicator light
Turn assist indicator light
Multi-terrain select indicator light*4
Headlight beam level control system warning light*3
Tire pressure warning light*5
SRS warning light
Ignition switch off → ON
Comes on for 6 seconds
CHARGE warning light
Ignition switch off → ON
Illuminates when ignition switch is turned to ON. Turns off when engine is started.
MIL
  1. *1: w/ Curtain Shield Airbag
  2. *2: w/ Pre-crash Safety System
  3. *3: w/ Headlight Leveling
  4. *4: w/ Multi-terrain Select
  5. *5: w/ Tire Pressure Warning System

INSPECT SPEEDOMETER
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Powertrain / Engine and ECT / Data List.

    Reference:

    mph:
    Standard Indication
    Acceptable Range
    20 mph
    18.5 to 22 mph
    40 mph
    39.5 to 42.5 mph
    60 mph
    59.5 to 63 mph
    80 mph
    80.5 to 84.5 mph
    100 mph
    100.5 to 105.5 mph
    120 mph
    119.5 to 126 mph
    140 mph
    141 to 147 mph

    km/h (except Australia):
    Standard Indication
    Acceptable Range
    20 km/h
    21 to 25 km/h
    40 km/h
    41.7 to 46.2 km/h
    60 km/h
    62.7 to 67.2 km/h
    80 km/h
    83.4 to 88.4 km/h
    100 km/h
    104.3 to 109.3 km/h
    120 km/h
    125.1 to 130.6 km/h
    140 km/h
    145.8 to 151.8 km/h
    160 km/h
    166.2 to 173.2 km/h
    180 km/h
    186.9 to 194.5 km/h
    200 km/h
    207.7 to 215.7 km/h
    220 km/h
    228.4 to 236.8 km/h
    240 km/h
    249.2 to 258 km/h

    km/h (for Australia):
    Standard Indication
    Acceptable Range
    20 km/h
    17.5 to 21.5 km/h
    40 km/h
    38 to 42 km/h
    60 km/h
    58 to 63 km/h
    80 km/h
    78 to 84 km/h
    100 km/h
    98.5 to 104.5 km/h
    120 km/h
    119 to 125 km/h
    140 km/h
    139 to 146 km/h
    160 km/h
    159 to 167 km/h
    180 km/h
    186.9 to 194.5 km/h
    200 km/h
    199 to 209 km/h
    220 km/h
    219 to 230 km/h
    240 km/h
    239 to 251 km/h
    If the result is not as specified, the speedometer may have a malfunction.
    NOTICE:
    Do not use worn, underinflated or overinflated tires, as the speedometer reading will be inaccurate.
  5. Check the deflection width of the speedometer indicator.

    Reference:
    Within 0.3°

INSPECT TACHOMETER
  1. Connect a tune-up tachometer, and start the engine.

  2. Compare the test results with the tachometer indicator.

    DC 13.5 V, at 25°C (77°F):
    Standard indication (rpm)
    Acceptable range
    Data in ( ) is for reference
    700
    630 to 770
    1000
    (900 to 1100)
    2000
    (1850 to 2150)
    3000
    2800 to 3200
    4000
    (3800 to 4200)
    5000
    4800 to 5200
    6000
    (5750 to 6250)
    If the result is not as specified, the tachometer may have a malfunction.


INSPECT METER/GAUGE
  1. Connect the intelligent tester to the DLC3.

  2. Perform Active Test (Click here).

    OK:
    Each meter/gauge needle indication is normal.

INSPECT WARNING/INDICATOR LIGHT
  1. Connect the intelligent tester to the DLC3.

  2. Perform Active Test (Click here).

    OK:
    Each warning/indicator light turns on and off using the intelligent tester.

INSPECT ENGINE OIL LEVEL WARNING (except 3UR-FE)
  1. Turn the ignition switch to ON and warm up the engine at an engine speed of 2000 rpm or less until the coolant temperature reaches approximately 80°C (176°F) or more.

  2. Disconnect the engine oil level sensor connector for 40 seconds or more.

  3. Turn the ignition switch to ON and check the multi-information display.

    OK:
    Low engine oil level message is displayed.

INSPECT MULTI-INFORMATION DISPLAY (w/ Multi-information Display)
  1. Connect the intelligent tester to the DLC3.

  2. Perform Active Test (Click here).

    HINT:
    If this Active Test is being performed and the ignition switch is turned off and then ON, the A/T and ODO/TRIP display background may turn white. If this occurs, end Active Test and turn the ignition switch off.
    OK:
    All dots in the multi-information display turn on and off using the intelligent tester.