Glove Box Light Removal

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Int). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION

  2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

  3. REMOVE FRONT DOOR SCUFF PLATE RH

  4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

  5. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)

  6. REMOVE LOWER INSTRUMENT PANEL (w/o Passenger Side Knee Airbag)

  7. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  8. REMOVE INSTRUMENT PANEL BOX DOOR KNOB

  9. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

  10. REMOVE GLOVE BOX LIGHT ASSEMBLY

Glove Box Light -- Removal


HINT:
  1. Use the same procedures for the RHD and LHD.
  2. The procedures listed below are the LHD side.


1. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION


  1. for Type A:



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Int).Vanity Light.Glove Box Light Removal

    1. Put protective tape around the No. 1 instrument panel finish panel cushion.

      Text in Illustration
      *a
      		Protective Tape

    2. Using a moulding remover B, detach the 4 claws and 3 clips and remove the No. 2 instrument panel finish panel cushion.



  1. for Type B:



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Int).Vanity Light.Glove Box Light Removal

    1. Put protective tape around the No. 1 instrument panel finish panel cushion.

      Text in Illustration
      *a
      		Protective Tape

    2. Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.



2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


  1. for Type A:



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Int).Vanity Light.Glove Box Light Removal

    1. Put protective tape around the lower instrument panel pad sub-assembly RH.

      Text in Illustration
      *a
      		Protective Tape

    2. Remove the clip and screw.



      3. Land Cruiser. Urj200, 202 Grj200 Vdj200

    3. Detach the 11 claws and guide and remove the lower instrument panel pad sub-assembly RH.



  1. for Type B:



      Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Int).Vanity Light.Glove Box Light Removal

    1. Put protective tape around the lower instrument panel pad sub-assembly RH.

      Text in Illustration
      *a
      		Protective Tape

    2. Remove the clip and screw.



      3. Land Cruiser. Urj200, 202 Grj200 Vdj200

    3. Detach the 7 claws and remove the lower instrument panel pad sub-assembly RH.



3. REMOVE FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 4 claws and 3 guides.

  1. Disconnect the connector and remove the No. 2 instrument panel under cover sub-assembly.



5. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Int).Vanity Light.Glove Box Light Removal

  1. Remove the 4 bolts.

  1. Detach the 4 claws and remove the front passenger side knee airbag assembly.

  1. Using a screwdriver, release the connector lock and disconnect the airbag connector.

    Text in Illustration
    *a
    		Connector Lock
    Land Cruiser. Urj200, 202 Grj200 Vdj200
    		Protective Tape
    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.
    CAUTION:
    Tape the screwdriver tip before use.


6. REMOVE LOWER INSTRUMENT PANEL (w/o Passenger Side Knee Airbag)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Int).Vanity Light.Glove Box Light Removal

  1. Remove the 2 bolts <B>.

    Text in Illustration
    *a
    		Bolt <B>

  1. Detach the 4 claws and remove the lower instrument panel.



7. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH


Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Int).Vanity Light.Glove Box Light Removal

  1. Put protective tape around the No. 3 instrument cluster finish panel garnish.

    Text in Illustration
    *a
    		Protective Tape

  1. Using a moulding remover A, detach the 6 claws and remove the No. 3 instrument cluster finish panel garnish.



8. REMOVE INSTRUMENT PANEL BOX DOOR KNOB
HINT:
Use the same procedure for both instrument panel box door knobs.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a moulding remover B, detach the 2 claws and remove the instrument panel box door knob.



9. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Int).Vanity Light.Glove Box Light Removal

  1. Put protective tape around the lower No. 2 instrument panel finish panel.

  1. Remove the 4 screws <C>.

    Text in Illustration
    *a
    		Protective Tape
    *b
    		Screw <C>


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 3 claws.

  1. Disconnect the connector and remove the lower No. 2 instrument panel finish panel.



10. REMOVE GLOVE BOX LIGHT ASSEMBLY


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Twist the glove box light assembly in the direction indicated by the arrow and remove it.