Room Light (For Front) On-Vehicle Inspection

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Int). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT MAP LIGHT ASSEMBLY

Room Light (For Front) -- On-Vehicle Inspection



1. INSPECT MAP LIGHT ASSEMBLY

  1. Remove the map light assembly with the connector connected.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Int).Vanity Light.Room Light (For Front) On-Vehicle Inspection

  1. Measure the voltage according to the value(s) in the table below.

    Standard Voltage:
    Tester Connection
    		Condition
    		Specified Condition
    6 (RILL) - 17 (GND9)
    		Battery save system (interior light auto cut function) operating → Battery save system (interior light auto cut function) not operating
    		11 to 14 V
    32 (ILLB) - 17 (GND9)
    		11 to 14 V
    13 (GILL) - 17 (GND9)
    		Light control switch tail
    		11 to 14 V
    6 (RILL) - 17 (GND9)
    		No. 1 room light on → off
    		11 to 14 V
    If the result is not as specified, replace the map light assembly.
    Text in Illustration
    *a
    		Component with harness connected
    (Map Light Assembly)


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Int).Vanity Light.Room Light (For Front) On-Vehicle Inspection

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    17 (GND9) - Body ground
    		Always
    		Below 1 Ω
    3 (GND5) - Body ground
    		Always
    		Below 1 Ω
    If the result is not as specified, replace the map light assembly.
    Text in Illustration
    *a
    		Component with harness connected
    (Map Light Assembly)