Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1VD-FTV ENGINE CONTROL
AIR FUEL RATIO SENSOR - INSTALLATION
| 1. INSTALL AIR FUEL RATIO SENSOR (for Bank 2) |
Using SST, install the air fuel ratio sensor to the front exhaust pipe.
- SST
- 09224-00010
- Torque:
- without SST:
- 44 N*m{ 449 kgf*cm, 32 ft.*lbf}
- with SST:
- 40 N*m{ 408 kgf*cm, 30 ft.*lbf}
| *1 | Fulcrum Length |
- HINT:
Use a torque wrench with a fulcrum length of 30 cm (11.8 in.). When using a torque wrench with a fulcrum length that is not 30 cm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification ().
Make sure SST and the wrench are connected in a straight line.
Connect the air fuel ratio sensor connector and attach the clamp.
| *1 | White Tape |
- HINT:
- Make sure that the white tape is in the position shown in the illustration.
| 2. INSTALL AIR FUEL RATIO SENSOR (for Bank 1) |
Using SST, install the air fuel ratio sensor to the front exhaust pipe.
- SST
- 09224-00010
- Torque:
- without SST:
- 44 N*m{ 449 kgf*cm, 32 ft.*lbf}
- with SST:
- 40 N*m{ 408 kgf*cm, 30 ft.*lbf}
| *1 | Fulcrum Length |
- HINT:
Use a torque wrench with a fulcrum length of 30 cm (11.8 in.). When using a torque wrench with a fulcrum length that is not 30 cm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification ().
Make sure SST and the wrench are connected in a straight line.
Connect the air fuel ratio sensor connector and attach the clamp.
| 3. PERFORM AIR FUEL RATIO SENSOR COMPENSATION RESET |
()