Room Light (For Front) On-Vehicle Inspection

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Int). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. CHECK MAP LIGHT ASSEMBLY

Room Light (For Front) -- On-Vehicle Inspection



1. CHECK MAP LIGHT ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Int).Vanity Light.Room Light (For Front) On-Vehicle Inspection

  1. Remove the map light with the connector connected.

  1. Measure the voltage according to the value(s) in the table below.

    Standard Voltage:
    Tester Connection
    		Switch Condition
    		Specified Condition
    R7-6 (RILL) - R7-17 (GND9)
    		Rear dome light off
    		11 to 14 V
    Rear dome light on
    		Below 1 V
    R7-10 (ILL-) - R7-17 (GND9)
    		Headlight dimmer switch off
    		11 to 14 V
    Headlight dimmer switch on
    		Below 1 V
    R7-13 (ILL+) - R7-17 (GND9)
    		Engine switch on (ACC)
    		11 to 14 V
    R7-15 (+B) - R7-17 (GND9)
    		Always
    		11 to 14 V
    R7-16 (DOME) - R7-17 (GND9)
    		Always
    		11 to 14 V

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    R7-1 (GND6) - Body ground
    		Always
    		Below 1 Ω
    R7-17 (GND9) - Body ground
    		Always
    		Below 1 Ω
    If the result is not as specified, replace the map light assembly.