Electrical Key Oscillator (For Front Floor) Removal

for Type A:

1. Put protective tape around the No. 2 instrument panel finish panel cushion.
   

   Text in Illustration

   *a	Protective Tape

2. Using a moulding remover B, detach the 4 claws and 3 clips and remove the No. 2 instrument panel finish panel cushion.
   

for Type B:

1. Put protective tape around the No. 2 instrument panel finish panel cushion.
   

   Text in Illustration

   *a	Protective Tape

2. Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.
   

for Type A:

1. Put protective tape around the lower instrument panel pad sub-assembly LH.
   

   Text in Illustration

   *a	Protective Tape

2. Remove the clip and screw.
   





3. Detach the 11 claws and guide.
   

4. Disconnect the connector and detach the clamps and remove the lower instrument panel pad sub-assembly LH.
   

for Type B:

1. Put protective tape around the lower instrument panel pad sub-assembly LH.
   

   Text in Illustration

   *a	Protective Tape

2. Remove the clip and screw.
   





3. Detach the 8 claws and 2 guides and remove the lower instrument panel pad sub-assembly LH.
   

for Type A:

1. Put protective tape around the No. 1 instrument panel finish panel cushion.
   

   Text in Illustration

   *a	Protective Tape

2. Using a moulding remover B, detach the 4 claws and 3 clips and remove the No. 2 instrument panel finish panel cushion.
   

for Type B:

1. Put protective tape around the No. 1 instrument panel finish panel cushion.
   

   Text in Illustration

   *a	Protective Tape

2. Using a moulding remover, detach the 7 claws and remove the No. 2 instrument panel finish panel cushion.
   

for Type A:

1. Put protective tape around the lower instrument panel pad sub-assembly RH.
   

   Text in Illustration

   *a	Protective Tape

2. Remove the clip and screw.
   





3. Detach the 11 claws and guide and remove the lower instrument panel pad sub-assembly RH.
   

for Type B:

1. Put protective tape around the lower instrument panel pad sub-assembly RH.
   

   Text in Illustration

   *a	Protective Tape

2. Remove the clip and screw.
   





3. Detach the 7 claws and remove the lower instrument panel pad sub-assembly RH.
   

for Type A, for Automatic Transmission:

1. Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.
   

for Type A, for Manual Transmission:

1. Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.
   

for Type B:

1. Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.
   
   

   
   
   
   
   

   Text in Illustration

   *A

   for Automatic Transmission

   *B

   for Manual Transmission

for Type A:

1. Put protective tape around the lower center instrument cluster finish panel sub-assembly.
   

   Text in Illustration

   *a	Protective Tape

2. Detach the 6 claws and remove the lower center instrument cluster finish panel sub-assembly.
   

for Type B:

1. Put protective tape around the lower center instrument cluster finish panel sub-assembly.
   

   Text in Illustration

   *a	Protective Tape

2. Detach the 7 claws.
   

3. Disconnect the connectors and remove the lower center instrument cluster finish panel sub-assembly.
   

Put protective tape around the lower console cup holder box sub-assembly.

Detach the 4 claws and remove the console cup holder box sub-assembly.

for Automatic Transmission:

1. Put protective tape around the upper console panel.
   

   Text in Illustration

   *a	Protective Tape





2. Detach the 8 claws and 5 clips.
   

3. Disconnect the connectors and remove the upper console panel.
   

for Manual Transmission:

1. Put protective tape around the upper console panel.
   

   Text in Illustration

   *a	Protective Tape





2. Detach the 8 claws and 5 clips.
   

3. Disconnect the connectors and remove the upper console panel.
   

Put protective tape around the upper rear console panel sub-assembly.

Detach the 4 claws, clip and 3 guides and remove the upper rear console panel sub-assembly.

for Type A:

1. Put protective tape around the upper console panel sub-assembly.
   

   Text in Illustration

   *a	Protective Tape





2. Detach the 8 claws and 4 clips and remove the upper console panel sub-assembly.
   

for Type B:

1. Put protective tape around the upper console panel sub-assembly.
   

   Text in Illustration

   *a	Protective Tape





2. Detach the 14 claws.
   

3. Detach the 14 claws. (b) Disconnect the connectors and remove the upper console panel sub-assembly.
   

Disconnect the connector.

Detach the 2 claws and remove the electrical key oscillator.