Manifold Absolute Pressure Sensor - On-Vehicle Inspection

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1VD-FTV ENGINE CONTROL

MANIFOLD ABSOLUTE PRESSURE SENSOR - ON-VEHICLE INSPECTION

1. CHECK DIESEL TURBO PRESSURE SENSOR
Manifold Absolute Pressure Sensor - On-Vehicle Inspection. 1VD-FTV ENGINE CONTROL. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Inspect the power source voltage.

Disconnect the sensor connector.

Measure the voltage according to the value(s) in the table below.

  • Standard Voltage:
  • Tester ConnectionSwitch ConditionSpecified Condition
    C80-3 (VC) - C80-1 (E2)Engine switch on (IG)4.5 to 5.5 V

Turn the engine switch off.

Connect the sensor connector.

Check the vacuum and pressure.

Connect the intelligent tester to the DLC3.

Turn the engine switch on (IG) and turn the intelligent tester on.

Enter the following menus: Powertrain / Engine / Data List / Map and Atmosphere Pressure.

Read the value.

  • OK:
  • ConditionMap and Atmosphere Pressure Value
    No pressure appliedSame as atmospheric pressure
    Vacuum appliedBecomes vacuum
    Pressure appliedBecomes pressurized

If the result is not as specified, replace the sensor.