Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Theft Deterrent Keyless Entry. Land Cruiser. Urj200, 202 Grj200 Vdj200
Theft Deterrent System (W/ Entry And Start System) -- Problem Symptoms Table |
- NOTICE:
- w/ Door control Battery:
- As the door control battery is installed between the vehicle battery and body ECU, first perform the inspections to confirm that there are no malfunctions in the power source circuit for the body ECU before performing this troubleshooting procedure (Click here).
- HINT:
- Troubleshooting of the theft deterrent system is based on the premise that the power door lock control system and the wireless door lock control system are operating normally. Accordingly, before troubleshooting the theft deterrent system, first make certain that the power door lock control system and the wireless door lock control system are operating normally.
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
| Symptom | Suspected Area | See page |
| The theft deterrent system cannot be set or canceled | Engine immobiliser system "security indicator light does not blink" | Click here |
| ACC signal circuit | Click here | |
| IG signal circuit | Click here | |
| Door unlock detection switch circuit | Click here | |
| Door courtesy switch circuit | Click here | |
| Engine hood courtesy switch circuit | Click here | |
| Harness or connector | - | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| After a wireless door lock operation is performed with the luggage compartment door open, the theft deterrent system is not set when the luggage compartment door is closed | Engine immobiliser system "security indicator light does not blink" | Click here |
| ACC signal circuit | Click here | |
| IG signal circuit | Click here | |
| Door unlock detection switch circuit | Click here | |
| Door courtesy switch circuit | Click here | |
| Engine hood courtesy switch circuit | Click here | |
| Harness or connector | - | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| After a wireless door lock operation is performed with the hood open, the theft deterrent system is not set when the hood is closed | Engine immobiliser system "security indicator light does not blink" | Click here |
| ACC signal circuit | Click here | |
| IG signal circuit | Click here | |
| Door unlock detection switch circuit | Click here | |
| Door courtesy switch circuit | Click here | |
| Engine hood courtesy switch circuit | Click here | |
| Harness or connector | - | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| Security indicator light does not blink when theft deterrent system is set | Engine immobiliser system "security indicator light does not blink" | Click here |
| The theft deterrent system becomes set by itself | Check customize setting | Click here |
| Door courtesy switch circuit | Click here | |
| Engine hood courtesy switch circuit | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| The theft deterrent system cannot be canceled by turning the engine switch on (IG) | Entry and start system (for start function) | Click here |
| Certification ECU (Smart key ECU assembly) | - | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| None of the alarm functions operate or the theft deterrent system can be set even when all necessary conditions are not met | Door unlock detection switch circuit | Click here |
| Door courtesy switch circuit | Click here | |
| Engine hood courtesy switch circuit | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| Even when the luggage compartment door is opened using the wireless function and the luggage compartment door opens, the theft deterrent system is not canceled and the vehicle enters the alarm sounding state | Main body ECU (multiplex network body ECU) (for LHD) | Click here |
| Main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| The doors are not forcibly locked when the vehicle is in the alarm sounding state | Entry and start system (for start function) | Click here |
| Wireless door lock control system | Click here | |
| Door unlock detection switch circuit | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| The vehicle does not enter the alarm sounding state when the battery is reconnected while the vehicle is in the armed state | Check operation of the security indicator light | Click here |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| The vehicle does not enter the alarm sounding state when the hood is opened while the vehicle is in the armed state | Check operation of the security indicator light | Click here |
| Engine hood courtesy switch circuit | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| The vehicle does not enter the alarm sounding state when the doors are unlocked while the vehicle is in the armed state | Door unlock detection switch circuit | Click here |
| Door courtesy switch circuit | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| The vehicle does not enter the alarm sounding state according to intrusion sensor operation (w/ Intrusion Sensor) | Intrusion sensor cancel switch circuit | Click here |
| Intrusion sensor circuit | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| The vehicle does not enter the alarm sounding state according to tilt sensor operation (w/ Intrusion Sensor) | Intrusion sensor cancel switch circuit | Click here |
| Tilt sensor circuit | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| The intrusion sensor does not turn off (w/ Intrusion Sensor) | Intrusion sensor cancel switch circuit | Click here |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| The vehicle does not enter the alarm sounding state according to glass breakage sensor operation (w/ Glass Breakage Sensor) | Glass breakage sensor circuit | Click here |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| The security horn assembly does not operate when the vehicle is in the alarm sounding state (w/ Security Horn Assembly) | Security horn circuit | Click here |
| The theft warning siren assembly does not operate due to the battery being disconnected when the vehicle is in the alarm sounding state (w/ Theft Warning Siren Assembly) | Theft warning siren circuit | Click here |
| The hazard warning lights do not operate when the vehicle is in the alarm sounding state | Combination meter assembly | Click here |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here | |
| The vehicle horn does not operate when the vehicle is in the alarm sounding state | Horn circuit | Click here |
| Hazard warning lights flash even when theft deterrent system is not set | Combination meter assembly | Click here |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for LHD) | Click here | |
| If the symptom(s) still occur after the above area is inspected and proved to be normal, replace the main body ECU (multiplex network body ECU) (for RHD) | Click here |