Accelerator Pedal - Installation

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - 1VD-FTV ENGINE CONTROL

ACCELERATOR PEDAL - INSTALLATION

1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY
  • NOTICE:
Avoid excessive force to the accelerator pedal sensor.
Do not disassemble the accelerator pedal sensor assembly.
This accelerator pedal does not requite lubrication.
Do not apply oil or other lubrication to the accelerator pedal sensor assembly.
If applied, the accelerator pedal sensor assembly must be replaced.
Accelerator Pedal - Installation. 1VD-FTV ENGINE CONTROL. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Install the accelerator pedal with the 2 nuts.

  • Torque:
  • 5.4 N*m{ 55 kgf*cm, 48 in.*lbf}

Connect the accelerator pedal position sensor connector.

2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)
Accelerator Pedal - Installation. 1VD-FTV ENGINE CONTROL. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Connect the connectors.

Attach the 3 claws to install the No. 1 instrument panel under cover.

Install the 2 screws.