Door Control Receiver Removal

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Door Lock. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)

  2. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)

  3. REMOVE REAR STEP COVER

  4. REMOVE REAR DOOR SCUFF PLATE RH

  5. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

  6. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

  7. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)

  8. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

  9. REMOVE REAR UPPER PILLAR GARNISH RH

  10. REMOVE DOOR CONTROL RECEIVER

Door Control Receiver -- Removal



1. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (except Face to Face Seat Type)

  1. Remove the rear No. 2 seat assembly RH (Click here ).



2. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Face to Face Seat Type)

  1. Remove the rear No. 2 seat assembly RH (Click here).



3. REMOVE REAR STEP COVER


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
Use the same procedure to remove the step cover on the other side.

  1. Detach the 2 claws and remove the step cover.



4. REMOVE REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedures described for the LH side.


5. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 6 clips and remove the support plate.



6. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
Use the same procedure to remove the tonneau cover holder cap on the other side.

  1. Detach the 2 claws and remove the tonneau cover holder cap.



7. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat, except Face to Face Seat Type)


Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Lock.Power Door Lock Control System.Door Control Receiver Removal
HINT:
Use the same procedure to remove the rear seat cover cap on the other side.

  1. Using a screwdriver, detach the 3 claws and remove the rear seat cover cap.

    HINT:
    Tape the screwdriver tip before use.


8. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH


Land Cruiser. Urj200, 202 Grj200 Vdj200
HINT:
When removing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Detach the 3 claws and remove the cover.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt and rear No. 1 seat belt anchor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Detach the 3 claws and remove the cover.



      2. Land Cruiser. Urj200, 202 Grj200 Vdj200

    2. Remove the bolt and rear No. 2 seat belt anchor.



  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Remove the clip and bolt.

    2. Detach the 16 clips and 2 claws.

    3. w/o Rear Air Conditioning System:
      Disconnect the rear seat lock control lever cable and then remove the quarter trim panel.



    4. w/ Rear Air Conditioning System:
      Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the quarter trim panel.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Lock.Power Door Lock Control System.Door Control Receiver Removal



  1. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:

    1. Remove the clip.



    2. Detach the 16 clips and 2 claws, and remove the quarter trim panel.


      Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Lock.Power Door Lock Control System.Door Control Receiver Removal



9. REMOVE REAR UPPER PILLAR GARNISH RH


Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a moulding remover, detach the 2 claws and open the seat belt shoulder anchor cover.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the bolt and seat belt shoulder anchor.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/o Power Back Door:

    1. Detach the 5 clips and remove the rear upper pillar garnish.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Lock.Power Door Lock Control System.Door Control Receiver Removal

  1. w/ Power Back Door:

    1. Detach the 5 clips.

    2. Pass the power back door rod through the rear upper pillar garnish, and remove the rear upper pillar garnish.



10. REMOVE DOOR CONTROL RECEIVER


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the connector.

  1. Remove the bolt and receiver.