Back Door Lock (For Double Swing Out Type) Inspection

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Door Lock. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT BACK DOOR LOCK ASSEMBLY

Back Door Lock (For Double Swing Out Type) -- Inspection



1. INSPECT BACK DOOR LOCK ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Lock.Power Door Lock Control System.Back Door Lock (For Double Swing Out Type) Inspection

  1. Check the operation of the door lock motor.

    1. Apply battery voltage to the door lock motor connector and check the operation of the door lock motor.

      OK:
      Measurement Condition
      		Specified Condition
      Battery positive (+) → Terminal 2 (ACT+)
      Battery negative (-) → Terminal 3 (ACT-)
      		Lock
      Battery positive (+) → Terminal 3 (ACT-)
      Battery negative (-) → Terminal 2 (ACT+)
      		Unlock
      If the result is not as specified, replace the back door lock assembly.
      Text in Illustration
      *a
      		Lock
      *b
      		Unlock
      *c
      		Component without harness connected
      (Back Door Lock Assembly)

  1. Check the detection switch.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Switch Condition
      		Specified Condition
      1 (S) - 4 (E)
      		Lock
      		10 kΩ or higher
      Unlock
      		Below 1 Ω
      If the result is not as specified, replace the back door lock assembly.


  1. Check the operation of the door courtesy switch.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Door Lock.Power Door Lock Control System.Back Door Lock (For Double Swing Out Type) Inspection


    Text in Illustration
    *a
    		Component without harness connected
    (Back Door Lock Assembly)
    		*b
    		Full Latch
    *c
    		Half Latch
    		*d
    		Open

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      		Condition
      		Specified Condition
      1 (E) - 2 (+)
      		Open
      		Below 1 Ω
      Half Latch
      		Below 1 Ω
      Full Latch
      		10 kΩ or higher
      If the result is not as specified, replace the back door lock assembly.