Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Door Lock. Land Cruiser. Urj200, 202 Grj200 Vdj200
Wireless Door Lock Control System (W/O Entry And Start System) -- Data List / Active Test |
DATA LIST |
- HINT:
- Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- NOTICE:
- In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Data List.
According to the display on the intelligent tester, read the Data List.
Main Body Tester Display Measurement Item/Range Normal Condition Diagnostic Note Key Unlock Warning SW Unlock warning switch / ON or OFF ON: Key inserted into ignition key cylinder
OFF: Key not inserted into ignition key cylinder- RR Door Courtesy SW Rear RH side door courtesy light switch signal / ON or OFF ON: Rear RH side door open
OFF: Rear RH side door closed- RL Door Courtesy SW Rear LH side door courtesy light switch signal / ON or OFF ON: Rear LH side door open
OFF: Rear LH side door closed- Back Door Courtesy SW Back door courtesy light switch signal / ON or OFF ON: Back door open
OFF: Back door closed- Back Door Lock Pos SW Back door lock position switch status / ON or OFF ON: Back door unlocked
OFF: Back door locked- D-Door Lock Pos SW Driver side door lock position switch signal / ON or OFF ON: Driver side door unlocked
OFF: Driver side door locked- D Door Courtesy SW Driver side door courtesy light switch signal / ON or OFF ON: Driver side door open
OFF: Driver side door closed- P-Door Lock Pos SW Front passenger side door lock position switch signal / ON or OFF ON: Front passenger side door unlocked
OFF: Front passenger side door locked- P-Door Courtesy SW Front passenger side door courtesy light switch signal / ON or OFF ON: Front passenger side door open
OFF: Front passenger side door closed- RR-Door Lock Pos SW Rear RH side door lock position switch signal / ON or OFF ON: Rear RH side door unlocked
OFF: Rear RH side door locked- RL-Door Lock Pos SW Rear LH side door lock position switch signal / ON or OFF ON: Rear LH side door unlocked
OFF: Rear LH side door locked- Back Door Lock Pos SW Back door lock position switch signal / ON or OFF ON: Back door unlocked
OFF: Back door locked- The Number of DTC Number of trouble codes / Min.: 0, Max.: 255 Number of stored DTCs -
ACTIVE TEST |
- HINT:
- Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Active Test.
According to the display on the intelligent tester, perform the Active Test.
Main Body Tester Display Test Part Control Range Diagnostic Note Hazard Turn signal flasher relay ON/OFF - Wireless Buzzer Wireless door lock buzzer ON/OFF - Door Lock Door lock motor LOCK/UNLOCK -