Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Door Lock. Land Cruiser. Urj200, 202 Grj200 Vdj200
Power Door Lock Control System -- Terminals Of Ecu |
| CHECK MAIN BODY ECU |
| *1 | Cowl Side Junction Block LH | - | - |
| *1 | Main Body ECU | - | - |
Remove the main body ECU from the cowl side junction block LH.
- for LHD: Click here
- for RHD: Click here
- for LHD: Click here
Connect the cowl side junction block LH connectors.
Measure the voltage and resistance according to the value(s) in the table below.
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition A-11 (GND1) - Body ground None - Body ground Ground Always Below 1 Ω A-30 (ACC) - Body ground None - Body ground ACC power supply Engine switch on (ACC) 11 to 14 V Engine switch off Below 1 V A-31 (BECU) - Body ground None - Body ground Battery power supply Always 11 to 14 V A-32 (IG) - Body ground None - Body ground IG power supply Engine switch on (IG) 11 to 14 V Engine switch off Below 1 V Install the main body ECU to the cowl side junction block LH.
- for LHD: Click here
- for RHD: Click here
- for LHD: Click here
Measure the voltage according to the value(s) in the table below.
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition 2I-7 (GSW) - Body ground B - Body ground Airbag sensor signal
(collision detection signal)Engine switch on (IG) with airbag sensor assembly connector disconnected 2.8 to 4.3 V 2I-9 (ACTD) - Body ground LA-L - Body ground Door lock motor unlock drive output signal (driver door) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder unlocked 11 to 14 V 2J-3 (ACT-) - Body ground LA-L - Body ground Door lock motor unlock drive output signal (front passenger side door and rear door RH) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder unlocked 11 to 14 V 2J-4 (ACT-) - Body ground LA-V - Body ground Door lock motor unlock drive output signal (rear door RH) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder unlocked 11 to 14 V 2J-5 (ACT+) - Body ground LA-B - Body ground*3
LA-R - Body ground*4Door lock motor lock drive output signal (front passenger side door) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder locked 11 to 14 V 2J-6 (ACT+) - Body ground LA-R - Body ground Door lock motor lock drive output signal (driver door) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder locked 11 to 14 V 2J-7 (ACT+) - Body ground LA-GR - Body ground Door lock motor lock drive output signal (rear door RH) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder locked 11 to 14 V 2J-16 (LSFR) - Body ground B - Body ground Front door RH unlock detection switch input signal Front door RH unlocked Below 1 V ignition switch off, all doors closed and front door RH locked Pulse generation 2J-19 (LSFL) - Body ground G - Body ground Front door LH unlock detection switch input signal Front door LH unlocked Below 1 V ignition switch off, all doors closed and front door LH locked Pulse generation 2J-21 (UL1) - Body ground LG - Body ground Door control switch assembly input Door control switch assembly off Pulse generation Door control switch assembly on (unlock) Below 1 V 2J-21 (UL1) - Body ground
*1LG - Body ground Master switch (door control switch) input Master switch (door control switch) off Pulse generation Master switch (door control switch) on (unlock) Below 1 V 2J-26 (L1) - Body ground L - Body ground Door control switch assembly input Door control switch assembly off Pulse generation Door control switch assembly on (lock) Below 1 V 2J-26 (L1) - Body ground
*1L - Body ground Master switch (door control switch) input Master switch (door control switch) off Pulse generation Master switch (door control switch) on (lock) Below 1 V 2J-28 (KSW) - Body ground*2 G - Body ground Key unlock warning switch input No key in ignition key cylinder Pulse generation Key in ignition key cylinder Below 1 V 2J-29 (RCTY) - Body ground BE - Body ground Rear door courtesy light switch assembly RH input signal Rear door RH open Below 1 V Rear door RH closed Pulse generation 2K-7 (ACT+) - Body ground LA-SB - Body ground*5
SB - Body ground*6Door lock motor lock drive output signal (rear door LH) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder locked 11 to 14 V 2K-8 (TR+) - Body ground*7 G - Body ground Back door lock motor drive output Back door closed Below 1 V Back door open 11 to 14 V 2K-9 (ACT-) - Body ground LA-P - Body ground*5
P - Body ground*6Door lock motor unlock drive output signal (rear door LH and back door*6) Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder off Below 1 V Multiplex network master switch assembly (door control switch), power window regulator switch assembly (door control switch) or driver door key cylinder unlocked 11 to 14 V 2K-31 (BCTY) - Body ground*5, *7 W - Body ground Back door courtesy light switch input Back door closed Below 1 V Back door open Pulse generation 2K-33 (LSWL) - Body ground L - Body ground Rear door LH unlock detection switch input signal Rear door LH unlocked Below 1 V ignition switch off, all doors closed and rear door LH locked Pulse generation 2K-34 (LCTY) - Body ground BE - Body ground Rear door courtesy light switch assembly LH input signal Rear door LH open Below 1 V Rear door LH closed Pulse generation E117-2 (LSWR) - Body ground W - Body ground Rear door RH unlock detection switch input signal Rear door RH unlocked Below 1 V ignition switch off, all doors closed and rear door RH locked 11 to 14 V E117-3 (ACTG) - Body ground*5 B - Body ground Collision door lock release signal Collision door lock release function does not operate Below 2 V*8
7.3 to 9.9 V*9Collision door lock release function operates Below 1 V E118-2 (UL3) - Body ground P - Body ground Driver door key-linked unlock input Driver door key cylinder turned to neutral position Pulse generation Driver door key cylinder turned to on (unlock) Below 1 V E118-6 (FLCY) - Body ground V - Body ground Front door courtesy light switch assembly LH input signal Front door LH open Below 1 V Front door LH closed Pulse generation E118-17 (LSWB) - Body ground*6 B - Body ground Back door unlock detection switch input signal Back door unlocked Below 1 V ignition switch off, all doors closed and back door locked 11 to 14 V E118-27 (FRCY) - Body ground V - Body ground Front door courtesy light switch assembly RH input signal Front door RH open Below 1 V Front door RH closed Pulse generation E118-29 (L2) - Body ground G - Body ground Driver door key-linked unlock input Driver door key cylinder turned to neutral position Pulse generation Driver door key cylinder turned to on (lock) Below 1 V - HINT:
- *1: for Models with Jam Protection Function on Driver Door Window Only
- *2: w/o Entry and Start System
- *3: for China
- *4: except China
- *5: for Lift Gate Type
- *6: for Double Swing Out Type
- *7: w/o Power Back Door System
- *8: Door control battery not charged
- *9: Door control battery charging or charged
| CHECK DOUBLE LOCK DOOR CONTROL RELAY (w/ Double Locking Function) |
Disconnect the E167 double lock door control relay connector.
Measure the voltage according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction on the wire harness side.Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition E167-12 (+B) - E167-7 (GND) LA-W - W-B Battery power supply Always 11 to 14 V E167-11 (CPUB) - E167-17 (GND) G - W-B ECU power supply Always 11 to 14 V E167-7 (GND) - Body ground W-B - Body ground Ground Always Below 1 V Reconnect the E86 double lock door control relay connector.
Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, the ECU may have a malfunction.Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition E167-1 (ACTR) - E167-7 (GND) P - V All door double lock motor off signal Door lock set → unset Below 1 V → 11 to 14 V → Below 1 V E167-8 (ACTS) - E167-7 (GND) G - W-B All door double lock motor on signal Door lock unset → set Below 1 V → 11 to 14 V → Below 1 V E167-6 (DLPD) - E167-7 (GND) LG - Body ground Double lock position switch signal Double lock set Below 1 Ω Double lock unset 10 kΩ or higher E167-5 (DLPP) - E167-7 (GND) GR - W-B Double lock position switch signal Double lock set Below 1 Ω Double lock unset 10 kΩ or higher E167-3 (DLPR) - E167-7 (GND) SB - W-B Double lock position switch signal Double lock set Below 1 Ω Double lock unset 10 kΩ or higher E167-3 (DLPL) - E167-7 (GND) LG - W-B Double lock position switch signal Double lock set Below 1 Ω Double lock unset 10 kΩ or higher