Can Communication System (For Lhd) System Diagram

Power Source Network. Land Cruiser. Urj200, 202 Grj200 Vdj200
Networking. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. w/ Network Gateway ECU

  1. w/o Network Gateway ECU

Can Communication System (For Lhd) -- System Diagram



w/ Network Gateway ECU
HINT:
  1. The master cylinder solenoid (skid control ECU) stores steering sensor and yaw rate sensor assembly DTCs and performs DTC communication by receiving information from the steering sensor and yaw rate sensor assembly.
  2. The ECM uses the CAN communication system to perform DTC communication instead of the conventional communication line (SIL).


  1. SYSTEM DIAGRAM


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Can Communication System (For Lhd) System Diagram


    No.
    		ECU/Sensor Name
    1
    		ECM
    2
    		Network gateway ECU
    3
    		Main body ECU (cowl side junction block LH)
    4
    		DLC3
    5
    		Air conditioning amplifier assembly
    6
    		Center airbag sensor assembly
    7
    		Multi-media module receiver assembly*1
    8
    		Headlight swivel ECU assembly*2
    9
    		Combination meter assembly
    10
    		Certification ECU (smart key ECU assembly)*3
    11
    		Multiplex tilt and telescopic ECU*4
    12
    		Outer mirror control ECU assembly*5
    13
    		Windshield wiper ECU*6
    14
    		Position control ECU and switch*5
    15
    		Accessory bus buffer
    16
    		Power back door unit assembly (power back door ECU)*7
    17
    		Tire pressure warning ECU and receiver*16
    18
    		No. 2 main body ECU*7
    19
    		Master cylinder solenoid (skid control ECU)
    20
    		Yaw rate sensor assembly*8
    21
    		Steering control ECU*9
    22
    		Steering angle sensor*8
    23
    		4WD control ECU
    24
    1. Parking assist ECU*10
    2. Clearance warning ECU assembly*11
    25
    		Seat belt control ECU*12
    26
    		Power steering ECU assembly*13
    27
    		Distance control ECU assembly*14
    28
    		Suspension control ECU*15
    29
    		No. 1 CAN junction connector
    1. *1: w/ Navigation System
    2. *2: w/ Dynamic Headlight Auto Leveling
    3. *3: w/ Entry and Start System
    4. *4: w/ Power Tilt and Power Telescopic Steering Column System
    5. *5: w/ Seat Memory
    6. *6: w/ Rain Sensor
    7. *7: w/ Power Back Door System
    8. *8: w/ Vehicle Stability Control System
    9. *9: w/ Variable Gear Ratio Steering System
    10. *10: w/ Side Monitor System
    11. *11: w/ TOYOTA Parking Assist-sensor System and w/o Side Monitor System
    12. *12: w/ Pre-crash Safety System
    13. *13: for 1VD-FTV with DPF
    14. *14: w/ Dynamic Radar Cruise Control System
    15. *15: w/ Active Height Control Suspension
    16. *16: w/ Tire Pressure Warning System


  2. V Bus


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Can Communication System (For Lhd) System Diagram



  3. Movement Control Bus


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Can Communication System (For Lhd) System Diagram



  4. MS Bus


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Can Communication System (For Lhd) System Diagram


w/o Network Gateway ECU
HINT:
  1. The master cylinder solenoid (skid control ECU) stores steering sensor and yaw rate sensor assembly DTCs and performs DTC communication by receiving information from the steering sensor and yaw rate sensor assembly.
  2. The ECM uses the CAN communication system to perform DTC communication instead of the conventional communication line (SIL).


  1. SYSTEM DIAGRAM


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Can Communication System (For Lhd) System Diagram


    No.
    		ECU/Sensor Name
    1
    		ECM
    2
    		Combination meter assembly
    3
    		Main body ECU (cowl side junction block LH)
    4
    		DLC3
    5
    		Air conditioning amplifier assembly
    6
    		Center airbag sensor assembly*1
    7
    		Multi-media module receiver assembly*2
    8
    		4WD control ECU
    9
    		Clearance warning ECU assembly*3
    10
    		Master cylinder solenoid (skid control ECU)
    11
    		Certification ECU (smart key ECU assembly)*4
    12
    		Multiplex tilt and telescopic ECU*5
    13
    		Accessory bus buffer
    14
    		Outer mirror control ECU assembly*6
    15
    		Windshield wiper ECU*7
    16
    		Position control ECU and switch*6
    17
    		Power back door unit assembly (power back door ECU)*8
    18
    		No. 2 main body ECU*8
    1. *1: w/ Airbag System
    2. *2: w/ Navigation System
    3. *3: w/ TOYOTA Parking Assist-sensor System and w/o Side Monitor System
    4. *4: w/ Entry and Start System
    5. *5: w/ Power Tilt and Power Telescopic Steering Column System
    6. *6: w/ Seat Memory
    7. *7: w/ Rain Sensor
    8. *8: w/ Power Back Door System


  2. V Bus


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Can Communication System (For Lhd) System Diagram



  3. MS Bus


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Networking.Lin Communication System.Can Communication System (For Lhd) System Diagram

HINT:
The ECM uses the CAN communication system to perform DTC communication instead of the conventional communication line (SIL).