Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Park Assist Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200
Blind Spot Monitor Sensor -- Installation |
- NOTICE:
- Avoid any impact to the blind spot monitor sensor.
- Do not drop the blind spot monitor sensor. If it is dropped, replace it with a new one.
- HINT:
- The blind spot monitor beam axis inspection is performed to confirm whether the sensor is transmitting radio waves.
- The blind spot monitor beam axis confirmation is performed to confirm whether the sensor's beam axis is correct, and perform adjustment of the beam axis by using reflector.
- The blind spot monitor sensor installation condition inspection is performed to confirm whether the sensor is placed vertically to the ground (+/-5°) by using a jig, and that the sensor is 16 to 24° from the line parallel to the vehicle center line.
| 1. INSTALL BLIND SPOT MONITOR BRACKET LH |
Install the blind spot monitor bracket LH with the 3 nuts.
- Torque:
- 10 N*m{102 kgf*cm, 7 ft.*lbf}
| 2. INSTALL BLIND SPOT MONITOR BRACKET RH |
- HINT:
- Use the same procedure described for the LH side.
| 3. INSTALL BLIND SPOT MONITOR SENSOR LH |
Install the blind spot monitor sensor LH with the 3 nuts.
- Torque:
- 10 N*m{102 kgf*cm, 7 ft.*lbf}
Connect the connector.
| 4. INSTALL BLIND SPOT MONITOR SENSOR RH |
- HINT:
- Use the same procedure described for the LH side.
| 5. PERFORM BLIND SPOT MONITOR INSTALLATION CONDITION INSPECTION |
| 6. INSTALL REAR BUMPER COVER |
for Standard:
(Click here)
w/ Towing Hitch:
(Click here)
w/ Pintle Hook:
(Click here)
| 7. PERFORM BLIND SPOT MONITOR BEAM AXIS INSPECTION |
| 8. PERFORM BLIND SPOT MONITOR BEAM AXIS CONFIRMATION |
| 9. PERFORM DIAGNOSTIC SYSTEM CHECK |