Ultrasonic Sensor (For Front) Installation

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Park Assist Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER

  2. INSTALL NO. 1 ULTRASONIC SENSOR

  3. INSTALL ULTRASONIC SENSOR CLIP

  4. INSTALL NO. 4 ENGINE ROOM WIRE

  5. INSTALL FRONT BUMPER COVER

Ultrasonic Sensor (For Front) -- Installation



1. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER
HINT:
Use the same procedure to install the No. 2 ultrasonic sensor retainer on the other side.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Park Assist Monitoring.Toyota Parking Assist-Sensor System.Ultrasonic Sensor (For Front) Installation

  1. Temporarily install the No. 2 ultrasonic sensor retainer to the front bumper.

    Text in Illustration
    *a
    		Protrusion
    *b
    		Keyhole
    NOTICE:
    1. Do not damage the bumper with the protrusion when installing the retainer.
    2. Securely install the No. 2 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Attach the 2 claws to install the No. 2 ultra sonic sensor retainer.



2. INSTALL NO. 1 ULTRASONIC SENSOR
HINT:
Use the same procedure to install the No. 1 ultrasonic sensor on the other side.

  1. Attach the 2 claws to install the ultrasonic sensor.

    NOTICE:
    Push the No. 2 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the No. 1 ultrasonic sensor.


3. INSTALL ULTRASONIC SENSOR CLIP

  1. Attach the 4 claws to install the ultrasonic sensor clip.

    NOTICE:
    Hold the No. 1 ultrasonic sensor in place so that the No. 2 ultrasonic sensor retainer does not come out when installing the ultrasonic sensor clip.


4. INSTALL NO. 4 ENGINE ROOM WIRE

  1. w/o TOYOTA Parking Assist-sensor System, w/ Fog Light:
    Install the No. 4 engine room wire.

    1. Attach the 11 clamps to install the No. 4 engine room wire.

    2. Connect the 2 connectors.

  1. w/ TOYOTA Parking Assist-sensor System, w/ Fog Light:
    Install the No. 4 engine room wire.

    1. Attach the 12 clamps to install the No. 4 engine room wire.

    2. Connect the 4 connectors.

  1. w/ TOYOTA Parking Assist-sensor System, w/o Fog Light:
    Install the No. 4 engine room wire.

    1. Attach the 12 clamps to install the No. 4 engine room wire.

    2. Connect the 2 connectors.



5. INSTALL FRONT BUMPER COVER
(Click here)