Dtc C168D Vehicle Information Unmatched

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Park Assist Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

PERFORM SETTINGS (BACK CAMERA POSITION SETTING, STEERING ANGLE SETTING, SIDE CAMERA POSITION SETTING)

CHECK FOR DTC

DTC C168D Vehicle Information Unmatched


DESCRIPTION

This DTC is stored if the multi-media module receiver assembly judges as a result of its self check that the vehicle information received via CAN communication and the vehicle information stored in the multi-media module receiver assembly do not match.

DTC Code
DTC Detection Condition
Trouble Area
C168D
Vehicle Information Unmatched
  1. Back camera position setting
  2. Steering angle setting
  3. Side camera position setting
  4. Multi-media module receiver assembly

INSPECTION PROCEDURE

NOTICE:
  1. When "System initializing" is displayed on the multi-media module receiver assembly after the battery terminal disconnected, correct the steering angle neutral point (Click here).
  2. Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system (w/o Side Monitor System) may be needed (Click here).
1.PERFORM SETTINGS (BACK CAMERA POSITION SETTING, STEERING ANGLE SETTING, SIDE CAMERA POSITION SETTING)

  1. Perform the following procedure depending on the memory conditions to register the vehicle information into the multi-media module receiver assembly.

    1. Refer to back camera position setting (Click here).

    2. Refer to steering angle setting (Click here).

    3. Refer to side camera position setting (Click here).


NEXT


2.CHECK FOR DTC

  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC C168D is not output.
    HINT:
    1. If DTC C168D is output, perform the procedure to allow the multi-media module receiver assembly to store the vehicle information again.
    2. If DTC C168D is still output after performing the procedure to make the multi-media module receiver assembly store the vehicle information 3 times, replace the multi-media module receiver assembly.


NG
REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (Click here)
OK

END (SETTINGS ARE DEFECTIVE)