Dtc C1694 Steering Angle Initialization Incomplete

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Park Assist Monitoring. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

INSPECTION PROCEDURE

PERFORM CALIBRATION

CHECK DTC OUTPUT

DTC C1694 Steering Angle Initialization Incomplete


DESCRIPTION

This DTC is stored when the multi-media module receiver assembly judges that the maximum steering angle has not been memorized (steering angle setting is incomplete).

DTC Code
Detection Item
DTC Detection Condition
Trouble Area
C1694
Steering Angle Initialization Incomplete
Maximum steering angle has not been memorized (steering angle setting is incomplete)
  1. Steering angle setting
  2. Multi-media module receiver assembly

INSPECTION PROCEDURE

NOTICE:
  1. When "System initializing" is displayed on the multi-display after disconnecting the cable from the negative (-) battery terminal, correct the steering angle neutral point. (Click here).
  2. Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed (Click here).
1.PERFORM CALIBRATION

  1. Perform the following procedure depending on the memory conditions to register the vehicle information into the rear television camera assembly.

    1. Steering angle setting (Click here).


NEXT


2.CHECK DTC OUTPUT

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check that no DTCs are output (Click here).

    HINT:
    1. If DTC C1694 is output, perform the steering angle setting again.
    2. If DTC C1694 is still output after performing the steering angle setting 3 times, replace the rear television camera assembly.
    Result
    Result
    		Proceed to
    DTC C1694 is not output
    		A
    DTC C1694 is output
    		B


B
REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (Click here)
A

END