Dtc C1Ae6 Rear Left Sensor Malfunction
DESCRIPTION
INSPECTION PROCEDURE
CHECK FOR DTC
REPLACE NO. 1 ULTRASONIC SENSOR (RL SENSOR)
CHECK FOR DTC
DTC C1AE6 Rear Left Sensor Malfunction |
DESCRIPTION
The No. 1 ultrasonic sensor (RL sensor) is installed on the rear bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (RL sensor). If the No. 1 ultrasonic sensor (RL sensor) has an open circuit or other malfunction, it will not function normally.DTC Code
| DTC Detection Condition
| Trouble Area
|
C1AE6
| A malfunction of the No. 1 ultrasonic sensor (RL sensor).
| - No. 1 ultrasonic sensor (RL sensor)
- Parking assist ECU*1
- Clearance warning ECU assembly*2
|
- *1: w/ Side Monitor System
- *2: w/o Side Monitor System
INSPECTION PROCEDURE
- NOTICE:
- If the DTC is output after repairs, turn the engine switch on (IG) and move the shift lever to R. Then clear the DTC.
Clear the DTCs (Click here).
Check for DTCs (Click here).
- OK:
- DTC C1AE6 is not output.
2.REPLACE NO. 1 ULTRASONIC SENSOR (RL SENSOR) |
Replace the No. 1 ultrasonic sensor (RL sensor) with a normally functioning one (Click here).
Clear the DTCs (Click here).
Check for DTCs (Click here).
ResultResult
| Proceed to
|
DTC C1AE6 is not output
| A
|
DTC C1AE6 is output (w/ Side Monitor System)
| B
|
DTC C1AE6 is output (w/o Side Monitor System)
| C
|
| |
|
| REPLACE CLEARANCE WARNING ECU ASSEMBLY (Click here) |
|
|
A |
|
|
|
END (NO. 1 ULTRASONIC SENSOR [RL SENSOR] IS DEFECTIVE) |
|