Navigation System Display Signal Circuit Between Multi-Display And Radio Receiver

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Navigation Multi Info Display. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK GVIF CABLE CONNECTOR

CHECK MULTI-DISPLAY ASSEMBLY

NAVIGATION SYSTEM - Display Signal Circuit between Multi-display and Radio Receiver


DESCRIPTION

The display image signal from the multi-media module receiver assembly is sent to the multi-display assembly using a GVIF cable.

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Navigation Multi Info Display.Navigation System.Navigation System Display Signal Circuit Between Multi-Display And Radio Receiver


INSPECTION PROCEDURE

1.CHECK GVIF CABLE CONNECTOR

  1. Check if the GVIF cable connector between the multi-media module receiver assembly and the multi-display assembly have any connection problems (Click here).

  1. Check that the screen display is normal.

    OK:
    Screen display is normal.


NG
Go to step 2
OK

USE SIMULATION METHOD TO CHECK (Click here)

2.CHECK MULTI-DISPLAY ASSEMBLY

  1. Replace the multi-display assembly (Click here).

  1. Check that the screen display is normal.

    OK:
    Screen display is normal.


NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

END (MULTI-DISPLAY ASSEMBLY IS DEFECTIVE)