Navigation System Display Does Not Dim When Light Control Switch Is Turned On

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Navigation Multi Info Display. Land Cruiser. Urj200, 202 Grj200 Vdj200

INSPECTION PROCEDURE

CHECK IMAGE QUALITY SETTING

CHECK VEHICLE SIGNAL (OPERATION CHECK)

NAVIGATION SYSTEM - Display does not Dim when Light Control Switch is Turned ON


INSPECTION PROCEDURE

1.CHECK IMAGE QUALITY SETTING


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Navigation Multi Info Display.Navigation System.Navigation System Display Does Not Dim When Light Control Switch Is Turned On

  1. Display the "Display" screen.

  1. Turn the light control switch to the tail or head position.

  1. Check if "Day Mode" setting on the display adjustment screen is on.

    Text in Illustration
    *a
    		Example
    Result
    Result
    		Proceed to
    "Day Mode" setting is on
    		A
    "Day Mode" setting is off
    		B


B
Go to step 2
A

TURN "Day Mode" SETTING OFF

2.CHECK VEHICLE SIGNAL (OPERATION CHECK)


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check (Click here).

  1. Check that the display changes between ON and OFF according to the light control switch operation.

    OK:
    Light Control Switch
    		Display
    Tail or head
    		ON
    Off
    		OFF
    HINT:
    The display is updated once per second. It is normal for the display to lag behind the actual switch operation.


NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY (Click here)