Audio Video. Pillar Speaker (For Front Side) Removal

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200

Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

PRECAUTION
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY
REMOVE FRONT PILLAR GARNISH LH
REMOVE FRONT NO. 3 SPEAKER ASSEMBLY

Pillar Speaker (For Front Side) -- Removal

1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

3. REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY

HINT:

Use the same procedure to remove the front assist grip on the other side.

Detach the 4 claws and remove the 2 assist grip plugs.

Remove the 2 bolts.

Detach the 2 claws and remove the front assist grip.

4. REMOVE FRONT PILLAR GARNISH LH

Detach the clip and 3 guides, and remove the front pillar garnish.

for 9, 14 Speakers:
Disconnect the speaker connector and then remove the front pillar garnish.

Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Pillar Speaker (For Front Side) Removal

Protect the curtain shield airbag.
1. Thoroughly cover the airbag with a cloth or nylon sheet and fix the ends of the cover with adhesive tape, as shown in the illustration.
  NOTICE:
  Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.

5. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY

Detach the 3 claws and remove the speaker.