Audio And Visual System (W/O Stereo Component Amplifier) Cassette Tape Cannot Be Ejected
INSPECTION PROCEDURE
CHECK OPERATION
CHECK CASSETTE TAPE
REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK
AUDIO AND VISUAL SYSTEM (w/o Stereo Component Amplifier) - Cassette Tape cannot be Ejected |
INSPECTION PROCEDURE
Press "EJECT" and check the operation.
Press the cassette tape EJECT switch of the radio receiver assembly for 2 seconds or more and check that the cassette tape is ejected.
- OK:
- The cassette tape is ejected.
Check the cassette tape.
Check that the ejected cassette tape does not have a peeled label, a cassette body deformation or any other defect.
- OK:
- No fault on the cassette tape.
3.REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK |
Replace the cassette tape with a normal one and check if the same problem occurs again.
- OK:
- Malfunction disappears.